How do i remotely change my iphone setting Info:iPhone 4, iOS 5.0.1
I lost my iphone and locked it remotely, now found my iphone and it won't accept my password
Can I connect to my windows based server either remotely or through VPN and look and operate in windows based files!? Info: iPhone 3GS
Is there any way to remotely turn on find my phone from my icloud/itunes account without using my phone? Info: iPhone 4S
I'm relatively new to linux. I was wondering if there is any program available that will remotely access my iPhone. I have seen programs that let me controll my PC using my iPhone but i would like the other way around. The girlfriend doesn't have internet access at home and she's always texting me. Well if I find a program that lets me remotely access my device I can text her back without leaving the keyboard. OS: Ununtu 10.10 iPhone 3G Jailbroken (3.1.3)
I tried to take apart my iPhone and completely trashed it to the point where it had to be replaced. The iPhone was glued together and the back case was made extremely cheap.Is the bold made the same way or is it a breeze to take apart and reassemble? Looking to change my trackball, bezel and keyboard and won't do it if it ever REMOTELY resembles how hard the iPhone was.
properly set up ssh to only allow one IP address to login remotely
how do I change the APN and MMS settings on an unlocked iPhone 4S? Info: iPhone 4S, iOS 5.1
How can I set the time when i want my Iphone to change from silent to ringer mode Info: iPhone 4S
My iPhone has no wifi, in settings the option is off and impossible to change it. Info: iPhone 3G, iOS 4.3.1
How can I change my APN settings on a recently factory unlocked AT&T iPhone 3gs? Info: iPhone 3GS, iOS 5.1.1
Hoping someone can provide a few beginners tips here... I'm trying to set up Remote HD app on my iPhone 4 so that I can tap in to my iMac remotely. I've set it up for the wireless LAN at home, but want to set it up to tap in over the web. The Remote HD website gives a small paragraph on it but it doesn't really mean anything to me. [URL] Can you give me any pointers on how to set this up?
How do I change settings on length of rings on incoming calls Info: iPhone 4
I have a computer running Fedora 14 and when I installed it, I chose to encrypt the drive. I've recently changed the way I have things set up and don't want the encryption any more. From what I've read there is no way to simply and easily remove the encryption, so what I would like to do is input the pass phrase remotely. so, Is there anyway I can type in the pass phrase remotely, or remove the encryption?
I recently bought a factory unlocked iphone 4s straight from apple.com, i purchased a straight talk micro sim and my calls are working fine but it says in order to use my data i need to change my apn settings. in my phones settings i cannot access my apn settings. how do i change my apn settings on my factory inlocked iphone 4s running ios 5.1.1? Info: iPhone 4S, iOS 5.1.1
If anyone would help me out, I would really appreciate it. I am a mac amateur and am trying to set up my imac so I can view it remotely on my Ipad. I am not sure what settings I need to change on the Imac nor how to make the changes. I have done some research on the differences between different apps for the ipad that allow remote desktop but they all seem to do the same thing. I just need the easiest one to set up.
i changed my modem router yesterday, did all the settings. all my devises can join my wi-fi but my iphone 5s cant. it recognizes the network, tries to join it, but cant join it. Turned my iphone on and off two times, Turned my router on and off several times, reset my network setting on the iphone, changed the channel on the router twice, pressed "forget this network" and tried to connect manually. Info: iPhone 5s, iOS 7.1.1
Is there anything like VLC (or logmein.com, etc) for an iPhone which will let me control the iPhone remotely, either from a computer or another iPhone?Recently my wife's phone went missing. We can see it in Find iPhone.But, we would like to get a sense of what is going on with it. Whoever found has it on and is not responding to messages we are sending to it
I'd like to be able to choose the OS to be booted on the next start, remotely. I explain, I've a dual boot win7/Kubuntu and I regularly use VNC connections to remotely control my PC but I've a problem, if I remotely edit my grub to start on Windows(I change the default option,save and reboot), I can't start again on Kubuntu, at least without being physically in front of the PC... . Any idea on how to edit the grub for only one time?
Yesterday, i foolishly unchecked a box on the summary tab when my iPhone was plugged into my PC that said "open iTunes when this iPhone is connected" so now when i plug my iPhone into my laptop NOTHING happens. I have no clue how to manually let my PC/iTunes know that i want it to connect to my iPhone so i can sync.� � I can't change the setting, because you can only view the setting when the iPhone is connected to iTues, which is what i cannot do right now. Info: iPhone 4S, Windows 8, Windows 8.1 laptop, iOS 7, iPhone 4
I am a professor at a university and use a TV studio in my class. One of my cameras uses a iPad for my teleprompter and it works fine through a good app but I would like to run it remotely from the control room. Is there a way to link my iMac computer screen to the iPad screen or run my iPad from my iPhone to better control the telepromter speed remotely? Info: iPad 2, iOS 7.1.2
i am looking to change the windows colour and colour intensity. These settings are accessable through Control PanelAppearance and PersonalizationPersonalizationWindow Color and Appearance But is there a way that i can remotely change these two settings through functions in my windows form application? Also is there any way of removing the slight blur on the window bars/taskbar when using an aero theme?
Using two totally different iphone apps I finally can log into my macbook pro remotely while in sleep using my iphone but it only works if the LCD is opened up. I noticed last night that when it's sleeping and the screen is closed when I remote log in that it wakes for only a second and immediately goes back to sleep. If the screen is open then everything works fine with either iphone app. Has anyone else noticed this? Information: Macbook pro Mac OS X (10.5.8)
I accidentaly synced my husband's iphone 4s to my Itune with Iphone 4. It deleted all messages, videos, pics and contacts, changed into setting of my Iphone 4. I logged out my Itune and logged in to my husband's Itune and tried to sync it, still the same old setting.. What can I do to retrieve the Iphone 4s setting and pics.
The default setting on iPhone, iPad, and iPod touch for POP accounts is to keep mail on the server. If you have changed the default setting on the iPhone, then the mail will only be stored on your iPhone. How do I change the default so mail is only stored on iPad? Info: iPad, iOS 5.1.1
I'am investigating a way to remotely control and solve basic problems of iPhone and iPad's. As an enterprise company we have over 2000 iPhones and iPads in our corporate and we want our help desk professionals be able to connect these type of mobiles and help staff over the phone. Is there a way to achieve this situation and could you please share with related articles about this sceneraio. Thanks Already Ozkan from Istanbul Info: iPhone 4, iOS 5.1
Is there a way to use the iphone as a sort of remote control for the ipad where you can use the iphone to remotely tell the ipad to start/stop recording? Also, is it possible to see the live recording of the ipad on the iphone?
if I make the move to iCloud will anything happen to my stored Mail messages in my .mac/.me account? I keep tons of old messages going back to 2003 as a method of filing information and dont want to lose it. Will anything else change? I use Mail on both my MacBook Pro and my iPhone, and also remotely via the internet. Info: MacBook Pro, Mac OS X (10.6.7)
Iphone 4 16 gb black malaysia set if send warrantly , the phone model will be changed?
When my iPad's docked and plugged into my speakers, I often want to change the music that's playing remotely. Is there any app that allows me to use my iphone via wifi or even bluetooth? There seem to be plenty of apps that allow me to control my computer with either Apple device, but I want one to use the other.
My linux box has a tv card, and I'm able to stream a live tv channel. I can watch that channel from anywhere there's an Internet connection. One thing I'd like to able to do is change channels remotely. Currently, I can change channels directly on the linux machine's keyboard by pressing the UpArrow. But I want to be able to do same remotely. My question then is, is it possible to programmatically simulate a keypress using php?
Well i need to make a chat program work on LAN which isn't a problem.However, I need to be able to log into the chat room off-site. The chat works by having one server and the clients connect to the server as needed. Then they can all chat.Well i figured i could set up port forwarding to allow me to connect remotely to my chat server, but I do not know the router information to log into it.Is there any way I can remotely connect to my server without setting up port forwarding through the router settings?Thanks,Philly0494PS: my chat program is written completely in vb6
How do I change the "Trash" icon to "Archive" icon as the default setting in email using iPhone iOS7?
what it is in my settings I need to change? Info: iPhone 4S
Is there any app or mothered that will allow me to remotely change text displayed on an Android tablet from another android tablet or phone? I am planning a charity fundraising event and it would be grate if I can hang my Motorola Xoom (running Android 4.1.1 Jelly Been) up on the wall with total amount raised and be able to remotely change / add amounts as people donate with my HTC One X or HP Touchpad running Android 4.0 ICS. FYI: All devices will be connected to same Wi-Fi network.
When am trying read Windows 2008 serivices Remotely from 2003 server by using following VB Script : 'Objective: TO check the SQLServicesHeartbeat of all SQL Server services and send email 'if any state of service is not running 'on error resume next Set iFSO = CreateObject("Scripting.FilesyStemObject") Set oFSO = CreateObject("Scripting.FilesyStemObject") [Code] ..... I am able to get read all windows 2003 servies, but not able to read Windows 2008 SQL Services Remotely, error throwing in the above line : Set objWMIService = GetObject("winmgmts:\" & strComputer & "ootcimv2").
So my company got me a used iphone.It is great cause I am the only person in the office who uses a Mac. But I am having this problem: my iPhone will sync with my Macbook but my Macbook will not sync with my iPhone. Example: lets say I have a contact and I add a photo to their contact card with my macbook - the iphone will not sync. Or I change an item in iCal on my Macbook but it never changes on my iphone. Conversely, I can make changes to everything on my iPhone and it will change iCal, Address Book, bookmarks, etc.So my issue is this: how can I fix it. I have gone through the process of restoring my iPhone to its factory settings three times and resetting all my mobile me configurations. The killer of all this is that the macbook changes sync just fine with my iPod Touch.I like the iPhone but this lack of integration is driving me nuts. Information: Macbook 13" Mac OS X (10.5.4) 2.2GHz 2 GB
Previous to the Upgrade from iPhone OS 3.1.3 to iOS4 I used Auto-Lock with "3 Minutes" Setting. After update to iOS4 the Auto-Lock is set to "1 Minute" and greyed out. What I tried so far: Reboot - didn't work Reset settings - didn't work Restore - did work and I could change settings to 3 Minutes - but after restore my Backup it is greyed out and back to 1 Minute. I will not restore to factory and rebuild that iPhone from scratch - their should be an other fix for that issue Information: iPhone 3GS iOS 4
Our home network starts at a Comcast modem/router. If I change my Mac to Google's DNS will it make any difference or do you need to go into the router settings and change there as well? Also, what if I change my iPhone WiFi DNS settings to the Google DNS as well. Information: iMac Mac OS X (10.6.2) iPhone 3GS
I am currently on my second iPhone 4s after losing my first one. I have encountered a problem where my contacts which also have an iPhone, thus receiving iMessages are seeing my contact name as my email address. How do I change this in the settings? I have tried to manually change it but even if I switch to the number option there seems to be no change. Info: iPhone 4S, iOS 5.1
I just changed my Apple ID username and password on my mac pro which changed my iCloud account settings. But when I try and change the iCloud settings on my iPhone to match the mac pro it won't let me because I need to enter the old account's password which virtually doesn't exist anymore.� Info: iPhone 4S, iOS 7.1.1
My AT&T iPhone 4S is set up to be used as Personal Hotspot. So I turn HotSpot on and connect my MacBook Pro to my iPhone's internet just fine. However, when I open Apple Remote app on the iPhone, it won't connect to iTunes on my MBP. I have set it up at home where both iPhone and MBP are connected to the wireless connection on the Apple Airport. It worked perfectly in that configuration. I'm in a band that plays weddings and corporate events. During breaks, I use Apple iTunes to DJ tracks. If I can't use Remote, I'm tethered to the stage constantly. This is a big problem. I need the internet connection to buy songs that are requested that I don't already own. And I need to be able to control iTunes remotely for when I'm in the crowd running microphones from one person to another during speeches and such. Info: MacBook Pro (15-inch Late 2011), Mac OS X (10.7.3)
I go through all the trouble to set up custom ringtones for different users.When I reboot the iPhone and/or when I Sync the iPhone all Contacts ringtones are reset to "DEFAULT."I've tried setting Ringtone Sync to Sync and No Sync.No Change.I've tried "Settings" "Sounds" "Lock Sounds" Both on and off.No Change.Everything else works A-OK.Custom Ringtones are really important for me for several contacts. Information: MAC PRO Mac OS X (10.5.5)
My iPhone clock time is off by one hour (And so is my son's and my sister's). If I change the setting on "Set Automatically" to "Off", the correct time is displayed. If I change it to "On", the time goes back one hour. The time zone setting is correct. Any suggestions? Information: iPhone 3GS
I know this is probably a really stupid question but this is the last chance to try and locate my gf's iphone which she has just lost in a taxi somewhere in Hong Kong. As she does not have international roaming she had it set on airplane mode so it's not like she can just call it up and find out if it's been handed in Is there anyway to remotely turn off airplane mode?I realise the automatic response might be 'well if she doesn't have a cellular network, how do you think you could sent anything to the phone even if there was a way to do it" but I'm literally grasping at straws here
I have an iPad and have it set up as my main music system via Logitech Z5500 speaker system, can someone please recommend an app for my iPhone to remotely control the iPod on the iPad? I have tried 'Remote' and 'Podlink'
My 3 year old, has learned to lock my ipad with a new passcode and every time I have to restore the ipad to the factory settings, and I don't normally keep a recent backup of my contents so I end up spending all day building up my library of apps etc. Is there an easier way to unlock your device? I know that you may lock your device remotely using the very useful find my iphone software but it can only be done using the existing passcode and not a new one.
I'm having some problems with my iPhone. I changed the password on it a while back and completely cannot remember what it is. I have iPhone 5S and haven't really used the password to unlock the phone since (I use the Touch ID). I couldn't get into my phone so I had to restore it. I remotely deleted it using find my iPhone because I was also having windows problems recognizing my phone. With a fresh install, I set up as a new phone and restored using an iCloud backup. I'm sure that during this process it asked me to set a new Touch ID as well as a new passcode, which I set to one that I use more frequently. I've used it for a bit now, and came to wanting to add my other fingerprints - it then asked me for my iPhone password. I entered what I thought it should be 4 times and then though hang on, has it changed my iPhone password? I then locked the device and entered the password it should have been set to a 5th time. That then activated the 'iPhone deactivated' screen, which has now disabled my Touch ID! I'm now locked out AGAIN, I'm assuming because the iCloud backup has restored a password that I can't remember, does this sound right?� how long erasing the phone, restoring, entering passcodes and wifi codes, restarting the whole icloud restore, and all the other bits of tinkering that you have to do, re-syncing 3000 tracks, letting photos redownload. I don't want to waste time doing this a third time...can you confirm/clarify whether it does pull over the previous passcode?� Info: iPhone 5s, iOS 7.1.1
I have an SSH server set up on CentOS 5.5 which I can succesfully use to access my file system remotely. On this machine, I also have a partition with XP installed on it. Is there a way I can set up the SSH server so that I can remotely access the files on the XP partition?
I just set up Remmina the other day to be able to access my desktop remotely. However, I can only do this when I am connected to my home network. Is there a way to set up Remmina so that I can connect to my desktop remotely from outside my home network?
I have a DLink DNS-323 NAS. I have set up FileBrowser to access it when I'm on my home network. Pretty simple setup. What I'm having a problem with is connecting to my NAS remotely. I've tried a million settings on FileBrowser to connect to my NAS when I'm off my home network. I use DynDNS and I'm able to connect to my NAS remotely from my Android phone and work computer with no problem.
I will be running a network of +- 35 Ubuntu pc's from next year on. I have already started setting up remote desktop viewing utilities, but I now need a way to remotely shut down all the pc's at the same time, with a simple command as Admin. Setting up scripts to execute at a certain time is not gonna help, as the online time wont be the same all the time. I want to avoid having to remotely shut down each and every pc, as this will take quite a lot of time.
I want to set my main PC as a remote desktop so I can use it for programming and data storage remotely. I plan to control it with my netbook running Ubuntu Netbook Remix. If I disable compiz I can successfully connect and manipulate my desktop remotely, but I can't do it with compiz enabled on any settings. Is there a way to fix this issue? Would I have the same problem if I installed KDE?
Last week i had my iphone stolen, but i never felt the need to make it trackable... NOW i have a new iphone, but i wont make the same mistake again... i have the icloud and mobile my and find my iphone all set up, but there is one thing i am trying to figure out: Since all the iphone apps only work when the phone is on i am wondering if there is a way to remotely turn on the iphone if needed? I "read" online from someone that claimed to be an apple employe, that there is the possibility of sending an "important message" to the phone that would power the phone on, and that the phone always stores enough battery life so that it is able to receive those important messages (with the exception that after several warning of low batter this might not work anymore). I have not found any other mentionings of this so i wanted to get informed here. So: Is there a way to remotely turn on my iphone 4? And also i was wondering if there is a way for me to make my old iphone turn into a brick, not even an ipod ? i still have the MEID of the old phone but nothing else, and i already had VERIZON shut off the service and am using the same phone number on my new iphone. I am also interested in maybe being able to remote control my iphone, i read that if i jailbreak it i could get some apps for that, but i dont feel comfortable voiding the waranty, so: Is there another way to remotecontrol my iphone 4? Additionally i am VERY interested in any additional security options for my phone, since i dont feel like having it taken again, and if i do i want to make sure that i am still in control of that phone. Info:iPhone 4, iOS 5.1.1
I'm using a cisco router modem DPC 3925 linking to my Dlink DNS320. In the router's "Port Range Forwarding", i've input "1025" in the start & end field and entering my ip address (correct me if I'm wrong cos i'm newbie). Then in the NAS setting should i change under FTP server to enter port as 1025 or where should i do the changes? So far my Filebrower can access the NAS under wifi but i would like to remotely access it when i'm out of home.
I am trying to access my server remotely using Windows' Remote Desktop Connection. It functions perfectly, but it does not go full screen because my local screen res is 1680x1050 ... Does anyone know any other remote desktop applications which work better in this way? I know I could just change the local res settings but it is a bit of a nuisance and looks really weird if I set it to something non-wide-screen...
I use Exchange Server for accessing email, calendar, etc, on my current iPhone. As a result, if my phone is lost or stolen, I can remotely wipe out all the data if I want to. I am about to replace all of our iPhones with EVO's and would like to know if I can do the same thing with those.
Have a Mac Mini Server and I try to connect to it using ssh but get an answer like: REMOTE HOST IDENTIFICATION HAS CHANGEDI used to have my older server with same address, but now that machine is sold and gone and it's OS is re-installed. I can't connect to my server remotely - what can I do now? Information: Mac Mini, iMac 24", MacBook, MacBook Pro, iPhone 3G Mac OS X (10.6.2) MacOS X Server 10.6.x, iPhone OS 3.1.2
I have an Iphone 4 and I just changed my number. After changing it ( last weekend) my phone has not let me receive or send texts or calls. Also, when I go to message settings on my phone my old number is still there and idk how to put in my new one. I have already tried resetting network settings. but that hasn't worked.... Info: iPhone 4, iOS 5.1.1
If I change my iPhone phone number can I use the same iTunes backup? Keeping iPhone 4, just want to change number and keep settings and all that. Is it possible? Info: iPhone 4, iOS 5.1
my Ibook sees the network, but refuses the password, same for my husbands iphone, although my iphone still connects.tried relaunching the airport twice, no change. tried changing airport settings, no change even triend to make it open network, no possibility to connectit seems that my ibook doesn't save the changes... and even when putting everything back as it was, it still refuses my password to connect to the airport.
After the 3.0 update in settings you are supposed to change what app loads after pushing the home bottom twice.No matter what app you change it to in settings it always defaults to the new search app with a double click. Information: iPhone 3G iPhone OS 3.0 NA
I wanted to know if any of you have issues with iTunes and the AppStore on your iPhones, whereas the language can not be changed ?I have a Swiss iPhone 3G and my content is in German even after I changed my languages in the general settings area of the phone to english.any suggestions would be dearly welcomed ! Information: iPhone 3G Windows XP Pro
I've had to change my email address, so I made a new account in itunes, along with the apple id in the store settings on my iphone. The problem is that when I go to update apps it will still ask me the password for my old email address, I've looked in all my settings, searched the net and I wouldn't have a clue in how to change it. Info: iPhone 4
I have recently purchased a Torch and set up two email accounts which both synch with Outlook. My emails are now being deleted from my Torch, although sent ones are still there. I have changed settings so email is deleted after 60 days. I read somewhere that I should turn off wireless reconcile, but that hasn't helped either. Does anyone have any other suggestions as the whole reason for having the blackberry is to connect with my emails remotely
I have recently purchased a Torch and set up two email accounts which both synch with Outlook. My emails are now being deleted from my Torch, although sent ones are still there.I have changed settings so email is deleted after 60 days. I read somewhere that I should turn off wireless reconcile, but that hasn't helped either.Does anyone have any other suggestions as the whole reason for having the blackberry is to connect with my emails remotely.
I have just had my first iphone and am wondering about how to change the settings for your messages.I understand you can turn the SMS preview off by setting a passcode lock. Are you able to change how your messages appear in the messages menu? I'd like to be able to only see the name not the message too, until I open the message.Also, are you able to get delivery reports? Also, can you save a message to your iphone not just your computer?
I have just bought an ipad that has no previous computer experience and is partially sighted so that he can enter the internet age as expected he is having issues with setup and acquiring applications he has managed to make a skype call i need to be able to take control of his ipad remotely so i can set up applications and changes in settings.
I am able to use wifi internet connection on my iphone but at the same time I am not able to use the wifi connection on my laptop. The setting is to be changed in my iphone and laptop or the changes is to done by the service provider at the server. Info: iPhone 4, iOS 7.1.2
Wirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_1 like Mac OS X; en-us) AppleWebKit/532.9 (KHTML, like Gecko) Version/4.0.5 Mobile/8B117 Safari/6531.22.7) Rookie questions: Is there a way to use your iMac drive to load programs over to your MacBook air?? Also, can you remotely ( from MacBook air ) transfer files from your iMac???
Does anyone know if you can have your Iphone return your deleted mail to your pop server inbox? When I tried to change my setting under mail behavior on our Iphone, the server inbox option was not available. The Iphone only would let me put the deleted email in the trash folder on the Pop server. We are using ATT yahoo mail and use other computers to access our mail. Information: Iphone iPhone OS 3.0
I am on the road and stay at many hotels, for about a month now, when I connect my a/v cable to the TV's my iPhone 4 shows it connected, plays the movie which I can hear Through the tv but no picture.I see in the settings area for iPhone, video - that it has change as there was different settings available before. Info: iPhone 4, iOS 5.0.1, Rogers
I've a problem with synchronisation between my MS Outlook calendar and my iPhone 3G via iTunes. I've installed the latest version of OS for iPhone and also for iTunes. If I syn my calendar-entries from outlook some dates are entered on my iPhone a day before (as date on outlook). I assumed it happens regarding the change of sommer-/winter time in Germany (outlook settings: change sommer-/winter time automatically, iPhone time-zone support activ (it doesn't work also with setting in-activ). A short example: in outlook calendar easter sonday (04.04.2010)/easter monday (05.04.2010) is correct, on iPhone calendar easter sonday --> on saturday (03.04.2010), easter monday on sonday (04.04.2010). Information: iPhone 3G iPhone OS 3.1.3
I would like to remote access my mac from home wherever I go. I don't want to do SSH or register at any website, I know it's better but all I'm looking for is to just be able to remote access my mac via screen share so here's what I've done so far. I've opened the ports on the airport extreme base station (5900 etc.) and set the private ip address for the mac under port mapping. I've set the private ip statically on my mac at home through system preferences I've turned on screen share on my mac at home I've recorded the public ip address for me to have for remotely logging in remotely I've done all of these steps and I still can't remotely login to my mac at home. Now, the only thing I forgot to do is set the password under the screen sharing settings under sharing. Is that the only thing I need to do to be able to achieve successful remote access? Is there anything else I need to do besides creating a password for VNC and the step I've described above?
One day, you noticed that someone remotely connectted your computer and an application sends spam/phishing emails bu using your IP. What do you do? Of course, I stopped the program and blocked remote connection for a while and changed my password... I any way, i have to connect my computer remotely... What do you advice? By the way, i have more than 1000 email accounts on my computer. Hacker left me a gift, but I don't need them))
For my centos box I use PuTTY and that allows me to get into the server and make any changes I need. I am looking at getting a second server, this one a Windows 2003 machine and I was wondering how you mange those servers remotely. Is it done using command line or is their a gui app to connect to it remotely? Can I install something like pcAnywhere on it or is there something web server specific?
i'm a little confused on how to set up remote access on a 10.5 server using an iPad or iPhone app.from what i've read, most, if not all, of these iPad remote apps use RDP or VNC as the protocol to connect to remote machines.the problem i am running into, is that it's not really possible to set up VNC access on a 10.5 server via the System Preferences, but that's how all of them instruct you to set up access from the iPad app.in order to turn VNC on through the Sys Prefs, Screen Sharing has to be enabled. But you can't turn on Screen Sharing if Remote Management is checked, which it has to be in order for Apple Remote Desktop to work. And we use ARD to remotely access/administer our server. I'm using Desktop Connect for the iPad. the only 2 options are to use RDP or VNC. i use VNC because the i don't think RDP is an option on a Mac w/o some 3rd party software.so what is the best way to set this up? do i need to enable a Service for this to work? how can enable VNC on the 10.5 server w/o disabling Remote Management? here is the criteria Desktop Connect asks for under VNC:1.hostname/address but it defaults to use port 5900 no matter if you use a FQDN or IP address authentication - VNC password SSH (on/off) username password (SSH password) hostname port (default is 22) i'm not sure how to set up SSH access on the server. on the server, in System Prefs/Sharing/Remote Login, it says "To log into this computer remotely, type "ssh <username>@<x.x.com>" so i don't know what to enter into the fields above.if you've successfully set up an iPad or iPhone app to remotely administer your OS X Server, please let me know how you've done it. Information: 2.4Ghz Unibody MacBook Pro Mac OS X (10.5.6) 4Gb RAM, 250Gb 7200RPM HD, Motu 828 Mk1, Logic Pro 8
Any one knows how to change the regisrty permission on a certain key remotely? At first I thought that it can't be done, but I found a Permission option under the Security menu in Regedt32 (NT 4.0). So there must be a way to do it. I have to do this to about 600 PC's remotely to install some applications and then reset the permissions back to what they were.Thanks------------------Joe HandalWorkstation Engineerjoe.firstname.lastname@example.org
Hi all, I am working on portal which is using MS Access 2003 database. The problem that I am facing is that once I received data from vendors I have to upload whole Access Database file to server. Initially it is not an issue but after increasing the size of database file (nearly to 50 MB) it is now difficult to upload such file on server. Is there any way to remotely connected to MS Access database file and update changes on database tables or to import tables remotely. Thanks a lot Asif