I have a DV9000 laptop and I have problem with the fan control and the Heat Sink. The tempeture of the GPU and CPU go very high (GPU 60 and CPU 48), but the fan runs very slow, like if the tempeture is ok and after that the computer stops. As well I want to replace the pads from the heat sink, so I would like to know which types of pads I should use for this computer and where the GPU is located, because there are three chips (the CPU in right side, one in the middle and another in the left side with the nvidia signature). my computer is Intel Duo and the bios is version D.25.
If you own one of the following laptops: Pavilion: dv2000, dv2500, dv2700, dv6000, dv6500, dv6700 dv9000, dv9500, dv9700 Compaq Presario: A900, C700, F700, V3000, V3500, V3700, V6000, V6500, V6700 HP: G6000, G7000 HP Compaq: 6720s Go to the following website: [url] or [url] Theere isw a specific range of battery serial numbers that are being recalled by HP. If you have a bettery that matches the reported serial number range you should contact HP immediately for a replacement battery.
to replace my Compaq V6000 AMD motherboard to an Intel. i am one of the victims of Nvidia GPU failure and i need to replace my motherboard to Intel. The original motherboard part number is 443777-001. i am aware of replacing amd cpu and fan to an intel which i have it on hand. i check Hp support and there are several intel motherboard numbers available to get such as part number 434725-001 but not sure if its the right part.
I would like to reduce the tempeture of my CPU and GPU. The current tempeture of the GPU is 60C and CPU 50C. I have thermal paste between the heat sink and the chips, but it is not enough. I would like to know if someone has tried the thermal copper pads from ebay or another effective method. [url] Do you know if the thermal copper pads can really reduce 20% of the tempeture in GPU and CPU?
A major BIOS update has been posted over at HP for current 14-inch Intel notebooks. A few models are supported in this release; see the list of compatible products below. COMPATIBLE PRODUCTS Code: SysId01=0x3607 SysName01=Compaq Presario CQ40 SysId02=0x3607 SysName02=Compaq Presario CQ40 SysId03=0x30F7 SysName03=HP Pavilion dv4;Compaq Presario CQ45 SysId04=0x30F8 SysName04=HP Pavilion dv4;Compaq Presario CQ45 SysId05=0x30F7 SysName05=HP Pavilion dv4;Compaq Presario CQ45 SysId06=0x30F8 SysName06=HP Pavilion dv4;Compaq Presario CQ45 RELEASE NOTES Quote:.............
HP has identified a hardware issue with certain HP Pavilion dv2000/dv6000/dv9000 and Compaq Presario V3000/V6000 series notebook Read more at their site[url] I had put the link in another thread; But i didnt include the series numbers of those affected.I ran the #'s in this sites search engine and came up nill .So now its "out there",.
HOW TO OVER CLOCK MY HDX 16 BOTH CPU AND GPU OVERCLOCKING......THE SPECIFICATION IS AS FOLLOWS Intel(R) Core(TM)2 Duo Processor P9550 (2.66GHz) FREE Upgrade to 4GB DDR2 System Memory (2 Dimm) from 3GB DDR2 System Memory (2 Dimm) FREE Upgrade to 320GB 5600RPM SATA Hard Drive from 250GB 7200RPM SATA Hard Drive 1GB Nvidia GeForce GT 130M 16.0" diagonal High Definition HP Ultra BrightView Infinity Display (720p) LightScribe SuperMulti 8X DVD+/-RW with Double Layer Support Webcam + Fingerprint Reader with HP Imprint Finish (Fluid) Intel Next-Gen Wireless-N Mini-card hp hybrID TV Tuner w/remote control Full SizecolouR matching Keyboard 6Cell Lithium Ion Battery No Productivity Software
I'm curious if anyone knows of a higher capacity fan or fans for the gpu and cpu heatsinks in an I9300/xps2.. I got to wondering if there are same size fans which move more air, maybe they spin faster, higher RPMs.. Also, would cutting slots or a hole in the left side of the cpu/gpu heatsink fan help or harm that side..? Anyone played with this, or experimented? My 7800gtx GPU idles at near 60degrees when fan control is set to auto..
Broken left hinge is a known problem in HP Pavilion dv9000/dv9100/dv9200/dv9400 notebooks. HP was fixing this issue at no charge but not anymore. The warranty program has expired on May 31, 2009. I just finished step-by-step repair instructions. Check it our here: How to replace broken left hinge in HP Pavilion dv9000 Make sure to use correct hinges. They are different for LCDs with single lamp and LCDs with dual lamp.
I can't seem to find the system drivers for "Compaq CQ40-517TU" I mean the chipset,audio,video and important drivers. I already look for drivers on HP sites but only HP bundled drivers are available. There is no drivers for system. Software & Driver Downloads Compaq Presario CQ40-517TU Notebook PC | HP� Support Compaq Presario CQ40-500 Notebook PC series - Download drivers and software - HP Business Support Center
I cannot get any fan information from 'lm-sensors' or 'sensors', I tried to run 'pwmconfig' and got this: Code: Code: But I have no tools to control the fan speed from 'acpi'. in particular '/proc/acpi/fan' is an empty directory. There are no fan info/controls in BIOS either. I believe the fans do not work as fast as they should and I am trying to find a way to fix this before the cpu cores are melted down from overheating. Laptop information: HP Pavilion dv2500t Code:
searching for the best spec'd DV9000 gpu, but my search results always just show up the overheating problem... does anyone know if there is a list around with all the different options of DV9000's? I currently have a 7600 go GPU, and I just bought a DV9000 mobo for $3 with a 7900 go GPU on it. As I can get them fairly cheap if I'm lucky, I want to find out what is the best GPU available on a DV9000 system board.
is there any easy way to change fan speed on my dv9740us by via software? i usually here the fan operating but it doesnt seem to be doin so at mex speed even on max cpu/gpu load at present im using rivatuner to ic my gpu and rmclock to undervolt my cpu could i possibly use these programs to control my fan? if not then are there any programs that would allow me to do this?
Hi All vbGurus outthere,I got the following problem with my project hopefully someone out there know the best solution.I need to merge two text files together without any duplicate data. The data in these text files contain a Key and Value which are both String. The Key string can be over 50 char long and the Value string is not unique. There are over 1000 data point so it have to be pretty efficient.eg.' File1 (unsorted)system:hp/cpu:intel/vdo:nVidea str1system:hp/cpu:intel/vdo:ATI str2system:hp/cpu:AMD/vdo:nVidea str3' File2 (unsorted)system:hp/cpu:AMD/vdo:ATI insertsystem:hp/cpu:AMD/vdo:nVidea replace' File1 + File2 -> Result(sorted)system:hp/cpu:AMD/vdo:ATI insertsystem:hp/cpu:AMD/vdo:nVidea replacesystem:hp/cpu:intel/vdo:ATI str2system:hp/cpu:intel/vdo:nVidea str1Thanx for the help
Just for you FIRST GENERATION dv6000 and dv9000 AMD owners, a new BIOS update has been posted over at HP. This update will also work with the Compaq V60xx-V64xx AMD notebook series. Quote: Released: 2009-03-25 Version: F.42 Compatibility: Microsoft Windows XP, Microsoft Windows Vista, Microsoft Windows Vista (64-bit), Microsoft Windows Vista Home Basic (64-bit), Microsoft Windows Vista Home Premium (64-bit), Microsoft Windows Vista Home Premium (32-bit), Microsoft Windows Vista Home Basic (32-bit), Microsoft Windows XP Professional, Microsoft Windows XP Media Center, Microsoft Windows XP Home Edition..........
i need sevice manual for Hp nx6125. Driver recovery cd user guides instruction service fix and repair just about anything using this website! <H1>laptop hp compaq nx6125 service manual </H1> Driver recovery cd user guides instruction service fix and repair just about anything using this website! <H1>laptop hp compaq nx6125 service manual </H1>
I have a HP Compaq 2230S business laptop, but this question could be put to any HP laptop. The fan is constantly running when the laptop is plugged into the power outlet, but as soon as I pull the plug to run on battery power the fan powers down and stops. I re-plug the laptop back in and the fan kicks up again. This is not good as I almost burned myself when I picked up the laptop after an hour sitting on the table on battery power. The hard drive is right beside the processor, so the laptop gets really hot. Vista x64 Ultimate is what I'm using at the moment and my power scheme calls for 1% minimum and 100% maximum CPU on battery power.
recently i bought this HP Compaq CQ61. inside BIOS there's a setting "Fan always on" and currently it sets at "On" as it keeps the fan constantly running. my question is, is it ok if i set it to "disable" hoping it will come at different temp? is it a good idea? just want to confirm. as long as i dont want to hear annoying fan noises, but the same time doesnt want to screw my motherboard?
I have just finished testing with my HP DL380 G3 server and I have been looking at different companies / facilities to ship it off to for co-location. How do you ease your own concerns of hardware failures on the server (aside from HDD which are easy to replace) when it is so far away. I control a datacenter / networking environment for my company, so I have immediate access to any of our gear that breaks, but I will not be co-locating within our facility for obvious reason. Are most people using left over Dell / Compaq / HP stuff or custom builds? I went with HP because of the built-in iLO capability to lessen the need for so much remote hands in the event of a reboot etc. I guess the biggest thing that is worrying me right now is a catstrophic hardware failure such as motherboard / cpu. All others can be quickly fixed (HDD, RAM, etc), but with a motherboard / cpu failure, the extended downtime can be long while spare are ordered / shipped.
I am currently stumped on troubleshooting error code lights for a clients hp compaq cq62. I have tried the hard reset, reseating the memory, and even plugging the notebook directly into the wall instead of a surge protector with the battery removed. I cannot find any solution on the HP site or any other forum site for that matter as to what a solid caps lock light and a solid orange light on the f12 key. Currently I am thinking the client is might need a new back light for the system or a new cpu.
I'm trying to install OpenSuSE 10.3 on a HP dc7800 PC but when it boots from the DVD everything starts looking good, when it tryes to load the kernel it reaches 99% and the screen goes black and stays in the state forever.. never comes back. But if I try too install an "SuSE desktop enterprise version" works perfect. PC details: HP COMPAQ PC DC7800 SMALL FORM FACTOR INTEL PENTIUM DUAL CORE CPU E2160 1.8GHz
I've been using my nx7400 for more than 3 years. I undervolted it with RM Clock and it was always running around 45-52 degrees idle and 53-59 under load. The fan only kicked in under load and over 55 degrees. I changed the CPU fan for a new one, I changed the thermal paste for MX-3 and I regularly use compressed air to clean the heat sink. Lately, it's running full throttle in intervals even in idle and temperatures 45-50. (5-15 seconds full throttle, 10 seconds inaudible... and so on) I could always leave it on my nightstand 24/7 as it was inaudible.
Thinking about getting the HP Compaq 2230s but curious about in general bloatware on buisness notebooks compared to Home & Home Office notebooks.
The few programs that I know that detect fans won't even show a fan on my laptop, nor does it show on my Friend's G60 (or whatever the silver one is, I don't remember it exactly). Mines isn't broken or anything,
how to control the fan on the HP6930P? I disabled "fan always on AC" in the bios. The fan is always on. It doesn't disturb at the lowest level, but it ramps up every 5 mins or so for 2 or 3 seconds. I find that ramping up disturbing and would like to disable it. Considering how cool the air coming out is compared to laptops I have had in the past (Thinkpads and Toshiba) I would say HP is being conservative with their settings. Is there a program or some bios setting?
My Idle temp seems to be within the range of: 27C-43C for CPU 44C-51C for GPU These are temps when I'm not even doing anything. The fan activates when the GPU hits 51C and stops when the GPU temp reaches 44C. The CPU doesn't seem to be a factor in activating the fan. Use I8Kfangui to see your CPU and GPU temps. Just don't click on AUtomatic Fan Control because that will severely lag your system until you turn it off. http://www.diefer.de/i8kfan/index.html
I see there are new HP DV6 models due out with the Processor type AMD Turion� II Ultra Dual-Core Processor M640 � 2.60 GHz, Level 2 cache 2 MB CPU, how good is this? Also how good is the 4530 GPU? Really wanting a laptop for music, browsing, video and some gaming how good would this CPU/gpu cope with that?
I have a Compaq V6310US with the Turion TL-50 (64 X2 1.6 GHz), I have already sent it in for a new systemboard under HP's recall. I use CPU-Z HWMonitor to monitor temps, here are my average LOAD temps (HL2/Counter-Strike:Source ~1 hour play time) with and without chill mat. Without Chill Mat: THRM: 79C Core 0: 78C Core 1: 85C GPU: 98C With Chill Mat: THRM: 77C Core 0: 75C Core 1: 82C GPU: 94C Idle for both is more around ~30/25/35/58. I get absolutely no signs of overheating during play. Are these acceptable temps or am I going to fry the GPU (or CPU) again in another year? Especially the temps without the mat? I don't always use it because the temps are pretty similar with and without it anyway. Also, anyone knows what the THRM temp is exactly?
My 4810T has the fan always on (not too loud, but on nevertheless...). I can't tell if it's because of the CPU (intel SU9400) or the GPU (intel gma 4500mhd). Is there any option where I can control this? I'm on Ubuntu and I'm using the "CPU frequency scaling monitor" applet to throttle the CPU, but even in it's lowest frequency, the fan never shuts down.
Cpu restarts in every 3 secs after installing new video card from asus. i have now intel video and its b...s..t with 128 mb memory on xp. interesting part is that shows 256 in 7. but still for playing games i need better card and my friend got me his old asus card with ati GPU: EAX1300HM512/TD/128M more info: The ASUS EAX1300HM512 is equipped with ASUS exclusive innovations and ATI Radeon X1300LE GPU. and for you about my cpu: HP Compaq dc 7600 Intel Pentium 4 CPU 2.8 GHz 2048 MB Ram Intel(R) 82945G Express Chipset Family video now PCI-E slot for graphix
my screen on my laptop broke as in spider web broke. I have a Compaq Presario V6500Z and I want to know if the Current model HP screens (for example HP Pavilion DV6113US screen) are compatible and interchangable with the compaq since both companies share the same parts.
I have a problem with game lagging. All the racing games (All need for speeds, all colin mcrae games, test drive unlimited) all work brilliant when it comes to graphics but there is a lag of like half a second to a second when it comes to controlling the car itself and it is very annoying and makes the games unplayable. Computer specs: Hp Compaq Presario Cq61 Pentium(R) Dual-core CPU T4200 @2.00GHz, Nvidia GeForce G103M 512MB RAM: 4GB Windows 7 64bit
my old crappy targus cooler broke for my hp dv5t and I am looking for a new one. My HP gets very hot, and I am especially worried about the cpu. Even with max undervolting it still gets to 65-75 quite often. Since I do not know much about which cooler would be best for my hp, I was wondering what cooler you use/recommend for this computer. Also I was wondering if the Zalman 1000 would be big enough for the hp dv5t 15.4 inch, to cool the gpu and cpu or should i be springing for the 2000 in case i decide to go zalman.
I have a DV9000 with a GeForce Go 7600. I was browsing the HP drivers yesterday when I noticed that a new version of the GeForce drivers was available for my system, released on April 28, 2009. Their site describes it as: HP Link Quote: Description: This package contains the driver for the NVIDIA GeForce Series video chip in the supported notebook models and operating systems................
my HP Pavilion dv9010us. I soled it to a friend, and he installed windows 7, I believe it to be the home 32 bit edition. Windows 7 is not compatible with HP dv9000 ?He brought me the computer and told me the monitor wasn't working. So I checked it out... I swear I've tried almost everything, and I'm about to through it out. I've tried using an external display, still didn't work.
I know the DV9000 has problems. I've had the laptop for 3.5yrs and at the end of last yr it died on me. I tried to find out the problem and eventually figured it was the overheating and badly manufactured design as so many other people with this laptop found. Even took it in for a fault assessment and they told me that the integrated graphics card was probably fried. Thing is, the other day I bought a screwdriver set and decided to open up the laptop and take a look around and boot it up again and now I'm having second thoughts. Firstly, if it was the graphic card that was fried, surely the hdd would still boot into windows? When I turn on the laptop, the screen goes grey / lights up (as it normally did when the laptop was working) but nothing much happens after that. I dont hear the hdd booting up and nothing really happens. All I hear is the fan working and eventually after 20min of nothing happening I just pulled the power cable out. So I tried taking out the hdd and booting up. Nothing comes up on the display and nothing happens. Even if the hdd is out, should any sort of display come up? like surely the BIOS or even a screen saying "no hdd detected" should come up? If it is the graphics card that is fried, does that mean that if I plug a secondary monitor into the monitor port on the laptop, it shouldnt display anything should it? or does the extra monitor port on the laptop run through a different circuit system than the main LCD screen on the laptop?