Configuration :: Unable To Load DLL 'sqlceme30.dll'


I have created a web site and using System.Data.SqlServerCE dll. I added this dll from the path:"C:Program FilesMicrosoft Visual Studio 8Common7IDESystem.Data.SqlServerCe.dll" And I run the web site in MS visual studio 2005 and all work fine and no error. I created a virtual directory and deployed my web site to the server. Then tried to browse the page. But when i tried to Browse the page on the Virtual Directory from server i got this error :. Unable to load DLL 'sqlceme30.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E) I though i have missed out some dlls on server , so i tried to run my web site on the same server using Visual Studio 2005 but it still works perfectly. I dont know why when i deployed to the virtual directory then it become not working...

View Answers
Very similar questions


Unable To Load Php_oci8.dll? www.phpbuilder.com

I�ve installed Oracle 8i and PHP4 on Windows NT, loaded php_oci8.dll, php_oracle.dll and it works fine.Now I've installed a second server using the same configuration and can�t load php_oci8.dll. I got a message "Unable to load php_oci8.dll. Access is denied"

Can’t Find P/Invoke DLL Sqlceme30.dll social.msdn.microsoft.com

Hi, i have Smart Device with following Configuration : Processor: ARMv4i OS: Window CE 5.0 I have� installed� SQL CE 3.0� on my Device.� When� I try to make new database on my devcie� using Qurey Analyser 3.0 , it gives "ISQLW Provider Failed... ". When I try Deploye SQL CE 3.0 Database Application using F5 in VS2005 , it give an error "Can��t find P/Invoke DLL sqlceme30.dll".Plz� tell me How can i resolve that problem. thanks. VIJAY KUMAR

Error:Application Development Based On Opencv? stackoverflow.com

I done my opencv code using windows console application vs2008 than i make that as a dll and used it in windows application vb.net. while running i got this error.i didn't get where i did mistake.The error is like this unhandled exception has occurred in your application if you click continue the application will close immediately.unable to load aranga.dll.The application failed to start because its side by side configuration incorrect. aranga.dll is my dll having my coding opencv coding part.

System.DllNotFoundException Was Unhandled? www.vbforums.com

My app loads a VB DLL, which in turn loads a C++ DLL. My exe and both DLLS are in the bin directory, yet I get the below error when the VB DLL calls the C++ DLL.Why isn't the VB DLL seeing the C++ DLL - it's in the same directory? System.DllNotFoundException was unhandled Message=Unable to load DLL 'DS.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E) Source=FordNetCom TypeName="" [Code]...

Unknown(): Unable To Load Dynamic Library - Php_xslt.dll Problem forums.devshed.com

im running winxp with IIS 5 when i try to load up the php_xslt.dll I get 3 notices saying: "Unknown(): Unable to load dynamic library 'C:phpextensionsphp_xslt.dll' - The specified module could not be found. in Unknown on line 0" and then a warning saying: "PHP Warning: Unknown(): Unable to load dynamic library 'C:phpextensionsphp_xslt.dll' - The specified module could not be found. in Unknown on line 0 " its only a problm with this extension because when i try to load php_zip.dll it loaded just fine .

Error In Loading DLL www.codeguru.com

Hi, I have an addin (*.xla) which uses some of the COM dlls(written using C++). When I check or uncheck this addin from the Tools->Addins in Excel I am getting this error "Error in Loading DLL". But even after this error, everything is working fine. I could not understand which DLL it is unable to load. Can anyone help me if there is anyway to find which DLL my addining is unable to Load?Thanks in advanceGiri

Unable To Load Module bytes.com

I am trying to load the LDAP and the MCrypt module under WinXP and PHP Version 4.3.7. The strange thing is that I have several other modules that work just fine: extension=php_bz2.dll extension=php_gd2.dll extension=php_mbstring.dll extension=php_pdf.dll extension=php_zip.dll but when I try to load also the ldap or mcrypt module, I get an error that the module cannot be found. the logifle says: PHP Warning: Unknown(): Unable to load dynamic library 'w:/server/php/php_ldap.dll' - The specified module could not be found.

Cannot Load Php_mcrypt Module (php_unregister_ini_entries Missing) bytes.com

I need to load php-mcrypt.dll when starting up Apache with PHP loaded as a module. I have these lines in my Apache http.conf: (at end of LoadModule section) LoadModule php4_module c:/php_4_2_0_win32/sapi/php4apache.dll (at end of AddModule section) AddModule mod_php4.c AddType application/x-httpd-php .php Apache comes up fine with other PHP extensions preloaded (like zlib, bz2, etc), but when I try mcrypt it does not. In my php.ini I have "extension=php_mcrypt.dll" (in addition to dlls for zlib, bz2, etc) and the dll is present in the windows systems32 folder. When I try to start Apache it says, "The procedure entry point php_unregister_ini_entries could not be located in the dynamic link library php4ts.dll", followed by "Unable to load dynamic library ./php_mcrypt.dll. The specified procedure cound not be found." Indeed, the dll file does not have such a function. How do I fix this? My configuration is Apache 1.3.24, PHP 4.2.0 running on Windows XP.

Unable To Load Custom Extension In 5.3.5 - Unable To Load Dynamic Library stackoverflow.com

I'm attempting to load a custom PHP extension on a Windows XP/IIS 5.1 development machine but I'm failing miserably. I have placed the PHP extension (php_fortranwrapper.dll) in the "ext" subfolder of my PHP 5.3.5 installation been editing the correct php.ini file (i.e. the one corresponding to the "Loaded Configuration File" entry listed in the phpinfo() output) set extension_dir in php.ini to point to the aforementioned "ext" subfolder added an extension=php_fortranwrapper.dll entry in php.ini to load the PHP extension restarted IIS (via iisreset) On running a phpinfo() script, it tries to load the page until FastCGI times out with the following error: The FastCGI process exceeded configured request timeout If I rename the PHP extension to say php_fortranwrapper1.dll, I logically see the following error: PHP Startup: Unable to load dynamic library 'C:...php-5.3.5extphp_fortranwrapper.dll' - The specified module could not be found. For information, I generated the PHP extension using PHP 5.3.5 and PHP4Delphi, a tool which compiles a PHP extension from Delphi source code. My Delphi code loads a Fortran DLL and passes an integer to a function in that Fortran DLL and expects an integer result back.

Php_mysql.dll Extension Not Loading bytes.com

I've enabled php_gd2.dll and php_mbstring.dll in the php.ini file and they're loading ok but the php_mysql.dll is not getting loaded. Apache's error.log reports: PHP Warning: PHP Startup: Unable to load dynamic library 'c:/program files/php/ext/php_mysql.dll' - The specified module could not be found. in Unknown on line 0 What puzzles me is that the MySQL server works ok, PHP works ok, several extensions work ok but php_mysql.dll cannot be found although it is in the extension directory.

Packaging My App. www.codeguru.com

Please help, this may be simple:When I use the wizard to pack my app. with an Access database and a crystal report.1.Some dll's are missing: u25store.dll and u25total.dll, these are not in my computer nor in the Crystal reports cd.The wizard packages my program anyway on my PC (NT).2.Now when i try to run the setup.exe on a win98 PC i get the following error msg: XX unable to call Dllregisterserver unable to load file 'C:Program FilesCommon FilesOLE DBmsdadc.dll' to register it XXBut this dll is in the right directory!.Please any hints, answers, i'm out of ideas!!Thanx

Error While Loading DLLs At Startup bytes.com

at startup I get three similar error messages about three DLLs: php_sqlite.dll, php_curl.dll and php_gd2.dll. I searched the group for similar problem but the solutions proposed there did not help. - I copied the DLLs to Windows directory - I checked php.ini to make sure the extensions were uncommented and there was an extension_dir directive. One thing I had noticed in the error messages was the direction of slashes: "Unable to load dynamic library c:phpextensions/php_curl.dll" In php.ini I had: extension_dir=c:phpextensions I changed it to: extension_dir=c:/php/extensions

Unable To Load Php_sqlsvr.dll social.msdn.microsoft.com

Hi, I am unable to get PHP to load the drivers from the package. I have tried adding the followings in php.ini (locate in the same path of php binary): extension=php_sqlsrv.dll When I try to verify php loaded module in prompt command, with this instruction php -v then I obtain this result: PHP Warning:� PHP Startup: Unable to load dynamic library 'c:phpextphp_sqlsrv.dll' - unable to find specified module. �in Unknown on line 0 PHP 5.2.5 (cli) (built: Nov� 8 2007 23:18:51) Copyright (c) 1997-2007 The PHP Group Zend Engine v2.2.0, Copyright (c) 1998-2007 Zend Technologies The path is correct and the php_sqlsvr.dll is into this directory. The SQL Native Client have also been installed. My configuration is: OS is Vista 32bit Version, PHP 5.2.5 What have I missed?

Name ConfigurationManager Is Not Declared? social.msdn.microsoft.com

I grabbed some code from the internet to use as a base to write out a log file. When I pasted it into my project in VB.net 2003, I immediately got an error message stating: [Code]... This is glossed over as an easy thing, but when I try to create the reference by right clicking references and selecting add reference, then going to .net, the system.configuration.dll does not show up in the list. I then did a search for the dll on my system and found it in this location: C:WINDOWSMicrosoft.NETFrameworkv2.0.50727System.configuration.dll I then tried to register this DLL using "regsvr32 system.configuration.dll", but I get this error: ---- System.configuration.dll was loaded, but the DLLRegisterServer entrypoint was not found.I also attempted to browse for the file using the add reference utility and it gave me an error stating that a reference to the file could not be added. "This is not a valid assembly or COM component." I'm really stuck at this point, I can't reinstall .net framework v2.0, the system won't let me. I can't create a reference and I can't get my program to work.

SQL Server 2005 On Windows CE 5 social.msdn.microsoft.com

Hi all, I'm having a problem trying to create a SQL server mobile (using SQL Server 2005). I do the following steps: I create the database, then I go to Visual Studio 2005 or 2008 (C#) and add this in my application. Drag and Drop the table to my form I run debug. I get the error: Impossible to locate PInvoke DLL 'sqlceme30.dll' I'm using windows Vista, and my pocket PC is Datalogic Memor, with Windows CE 5, Compact Frame Work 2. Fernando

Load Dynamic Dll - _domxml.dll, Invalid ELF Header phpbuilder.com

I'm trying to load a DLL - my host has turned off safe mode so I could use the PHP dl() function.. dl("php_domxml.dll"); trouble is, i'm getting the error Warning: dl() [function.dl]: Unable to load dynamic library './php_domxml.dll' - ./php_domxml.dll: invalid ELF header Code:

Visual Studio :: Cannot Get Attached Debugger To Page In Website Folder forums.asp.net

I'm using Vs2010 professional. I was working with a large WebSite (folder) project at work using IIS7 and tried to attach the debugger to the w3wp.exe for debugging an aspx page in IE8 after setting breakpoints in the javascript for the page and in the Page_Load in the code behind. I got a "first chance exception of type 'System.InvalidOperationException' occurred in System.dll" in my debug output, so I gave up for the moment. I created a default website project in the root of IIs7, and set it up as an application in IIs7 with the default app pool. I tried entering a little javascript in the head, and set a breakpoint, and set a breakpoint again in the Page_Load. I attached the debugger again to w3wp.exe. I see the assemblies load in the debug output and nothing happens: Ignoring attach security warning for process C:WindowsSystem32inetsrvw3wp.exe, owned by IIS APPPOOLDefaultAppPool [administrator] 'w3wp.exe' (Managed (v4.0.30319)): Loaded 'C:WindowsMicrosoft.NetassemblyGAC_64mscorlibv4.0_4.0.0.0__b77a5c561934e089mscorlib.dll' 'w3wp.exe' (Managed (v4.0.30319)): Loaded 'C:WindowsMicrosoft.NetassemblyGAC_64System.Webv4.0_4.0.0.0__b03f5f7f11d50a3aSystem.Web.dll' 'w3wp.exe' (Managed (v4.0.30319)): Loaded 'C:WindowsMicrosoft.NetassemblyGAC_MSILSystemv4.0_4.0.0.0__b77a5c561934e089System.dll' 'w3wp.exe' (Managed (v4.0.30319)): Loaded 'C:WindowsMicrosoft.NetassemblyGAC_MSILSystem.Corev4.0_4.0.0.0__b77a5c561934e089System.Core.dll' 'w3wp.exe' (Managed (v4.0.30319)): Loaded 'C:WindowsMicrosoft.NetassemblyGAC_MSILSystem.Configurationv4.0_4.0.0.0__b03f5f7f11d50a3aSystem.Configuration.dll' 'w3wp.exe' (Managed (v4.0.30319)): Loaded 'C:WindowsMicrosoft.NetassemblyGAC_MSILSystem.Xmlv4.0_4.0.0.0__b77a5c561934e089System.Xml.dll' 'w3wp.exe' (Managed (v4.0.30319)): Loaded 'C:WindowsMicrosoft.NetassemblyGAC_MSILMicrosoft.Build.Utilities.v4.0v4.0_4.0.0.0__b03f5f7f11d50a3aMicrosoft.Build.Utilities.v4.0.dll' 'w3wp.exe' (Managed (v4.0.30319)): Loaded 'C:WindowsMicrosoft.NetassemblyGAC_MSILSystem.Runtime.Cachingv4.0_4.0.0.0__b03f5f7f11d50a3aSystem.Runtime.Caching.dll' 'w3wp.exe' (Managed (v4.0.30319)): Loaded 'C:WindowsMicrosoft.NetassemblyGAC_MSILSystem.Web.RegularExpressionsv4.0_4.0.0.0__b03f5f7f11d50a3aSystem.Web.RegularExpressions.dll' 'w3wp.exe' (Managed (v4.0.30319)): Loaded 'C:WindowsMicrosoft.NetassemblyGAC_64System.Datav4.0_4.0.0.0__b77a5c561934e089System.Data.dll' 'w3wp.exe' (Managed (v4.0.30319)): Loaded 'C:WindowsMicrosoft.NetassemblyGAC_MSILSystem.Drawingv4.0_4.0.0.0__b03f5f7f11d50a3aSystem.Drawing.dll' 'w3wp.exe' (Managed (v4.0.30319)): Loaded 'C:WindowsMicrosoft.NetassemblyGAC_MSILMicrosoft.JScriptv4.0_10.0.0.0__b03f5f7f11d50a3aMicrosoft.JScript.dll' 'w3wp.exe' (Managed (v4.0.30319)): Loaded 'C:WindowsMicrosoft.NetassemblyGAC_MSILCppCodeProviderv4.0_10.0.0.0__b03f5f7f11d50a3aCppCodeProvider.dll' 'w3wp.exe' (Managed (v4.0.30319)): Loaded 'C:WindowsMicrosoft.NETFramework64v4.0.30319Temporary ASP.NET Fileswebsite297987469de3b823App_global.asax.g3ldh1jy.dll' 'w3wp.exe' (Managed (v4.0.30319)): Loaded 'C:WindowsMicrosoft.NetassemblyGAC_MSILSystem.ServiceModel.Activationv4.0_4.0.0.0__31bf3856ad364e35System.ServiceModel.Activation.dll' 'w3wp.exe' (Managed (v4.0.30319)): Loaded 'C:WindowsMicrosoft.NetassemblyGAC_MSILSystem.Web.Extensionsv4.0_4.0.0.0__31bf3856ad364e35System.Web.Extensions.dll' 'w3wp.exe' (Managed (v4.0.30319)): Loaded 'C:WindowsMicrosoft.NetassemblyGAC_MSILSystem.Runtime.DurableInstancingv4.0_4.0.0.0__31bf3856ad364e35System.Runtime.DurableInstancing.dll' 'w3wp.exe' (Managed (v4.0.30319)): Loaded 'C:WindowsMicrosoft.NetassemblyGAC_MSILSystem.Web.Mobilev4.0_4.0.0.0__b03f5f7f11d50a3aSystem.Web.Mobile.dll' 'w3wp.exe' (Managed (v4.0.30319)): Loaded 'C:WindowsMicrosoft.NetassemblyGAC_MSILSystem.ServiceModelv4.0_4.0.0.0__b77a5c561934e089System.ServiceModel.dll' 'w3wp.exe' (Managed (v4.0.30319)): Loaded 'C:WindowsMicrosoft.NetassemblyGAC_MSILSMDiagnosticsv4.0_4.0.0.0__b77a5c561934e089SMDiagnostics.dll' 'w3wp.exe' (Managed (v4.0.30319)): Loaded 'C:WindowsMicrosoft.NetassemblyGAC_MSILSystem.Xaml.Hostingv4.0_4.0.0.0__31bf3856ad364e35System.Xaml.Hosting.dll' 'w3wp.exe' (Managed (v4.0.30319)): Loaded 'C:WindowsMicrosoft.NETFramework64v4.0.30319Temporary ASP.NET Fileswebsite297987469de3b823App_Web_t1ltfooj.dll' 'w3wp.exe' (Managed (v4.0.30319)): Loaded 'C:WindowsMicrosoft.NETFramework64v4.0.30319Temporary ASP.NET Fileswebsite297987469de3b823App_Web_myfv4sgi.dll' The thread '<No Name>' (0x22cc) has exited with code 0 (0x0). I am using 64 bit Windows 7 Professional.

C# - Unable To Find DLL When Website Runs In IIS stackoverflow.com

When I run the website locally using my VS, everything works. I am calling a function inside a dll using P/Invoke. DLL is in C++ and it works. When I deploy the website on IIS, I get the error message Unable to load DLL 'SolvingProbelm.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E) The dll resides inside the bin folder. App pool is Classic and .net 2.0

Oracle Installation forums.devshed.com

I have install the Oracle on remote machine and write a simple code to connect with remote machine...but i 'm not able to get wht setting we have to do in php to run for Oracle..i got some drafts from internet...i uncomment the extension in php.ini (php_oci8.dll) then copy this .dll to extension_dir path of php.ini...and then copy the oci.dll and php_oci8.dll to windows/system...when i run apache shows warning... "Unable to load dynamic library �D:PHPextensions/php_oci8.dll� � The specified procedure could not be found."

Unable Register A Dll www.codeguru.com

I am facing some problems while registering a COM dll. I am using the commandregsvr32 [Path] dll NameI am able to register the dll on some machines and unable to register on some machine in my organization. We are using windows 95.It is giving an error "Load Library &lt; Dll Name &gt; failed".I am not able to figure out where exactly the problem lies. Is it because of regsvr32 or some other dll.please help me to solve this problemwith regardsChakradharSoftware EngineerIT Solutions IndiaBanagalore

How To Load Dependent Assembly bytes.com

I have three dlls ProjBL.dll , ProjDL.dll and ProjMC.dll. ProjBL.dll is Business object dll ProjDL.dll is Data Access layer method dll ProjMC.dll is Master Class dll contains Properties ProjDL.dll depends on ProjMC.dll and ProjBL.dll depends on ProjDL.dll I have load ProjBL.dll in Memory using Assembly.Load() method from folder on D: drive with specified folder. Currently it gives error that "One of dependent Assembly not found".

Unable To Load Dynamic Library 'C:/php/ext/php_mysql.dll' bytes.com

I keep getting this: "PHP Warning: PHP Startup: Unable to load dynamic library 'C:phpextphp_mysql.dll' - The specified module could not be found." when I tried to load the php_mysql.dll module when starting my Apache 2.0 in windows XP. The file, php_mysql.dll is there. why? Do I have to load this file before I can use "mysql_connect()"?

Application Configuration In Cache www.xtremevbtalk.com

Guys, I've got a tricky job here! Cenario is:- I have a application Ini with the configuration of the Database (something like database.ini) and I have a Database DLL.- I have a configuration table on the Database, something like (tb_configuration)- To get application configuration information, I go on Sql Server and get the information, but currently i'm doing an ActiveX DLL that will use this configuration. In the current cenario, everytime i Create the object CreateObject("ddname.class"), i get a new instance of the DLL and it goes again for the configuration table (connecting to the database, querying for the data) and this is ****ing me off.The question is :Is there anyway to record this configuration in another scope? So when i create the object it searches for the configuration in memory and only if not found it goes to the database. PS.: I could pass this configuration to the DLL by the application (and save it on the Exe scope), but it will envolve more than 1 application, and the idea is to encapsulate all the information about this specific module only on the DLL.Any ideas?If I was not "clear" please reply asking me!

Error Connecting To .sdf Database social.msdn.microsoft.com

Dear All, ���������������I am trying to connect to a .sdf database. I am building a console application. First I got an error "Could not load file or assembly 'System.Data.SqlServerCe, Version=, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)".�� Then I manage to solve "Unable to load DLL 'sqlceme30.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E)". So wat is the possible error on my side ?

Unable To Find Entry Point Method In DLL social.msdn.microsoft.com

I get this error Unable to find an entry point named 'UpdateResource' in DLL 'kernel32.dll'.

Installing PHP www.sitepoint.com

I've installed PHP, MySQL and Apache on my XP. I've uncommented some extensions in php.ini and among them: extension=php_pdf.dll and extension=php_mysqli.dll, but when I start Apache I got the message: PHP Startup: Unable to load dynamic library 'c:phpextphp_mysqli.dll' - The specified module could not be found But I have that module in c:phpextphp_mysqli.dll.

Ebedded Visual Basic Program Can't Call A DLL. www.codeguru.com

I work with iPAQ(Pocket PC, Wince 3.0).I made a simple DLL just return a integer 100.I test the DLL call program made by EVB in emulater(Pocket PC), it does not work.But, it do work at iPAQ device.Error message is "Unable to load function XXX"(XXX is the function name in DLL)Oddily, when I make a call program with EVC and same DLL, It do good work at emulater.What is problem?Thanks~~~

Unable To Connect IBM MQ Via - Unable To Load DLL 'amqxcs2.dll' stackoverflow.com

I am trying to check the connection with one of active IBM MQ's but I am getting this error.. Unable to load DLL 'amqxcs2.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E) I am using the following code.. Included amqmdnet.dll and amqmdxcs.dll in bin and gave the same reference to the project. using IBM.WMQ; using IBM.WMQ.PCF;

Installing Ffmpeg Module On Windows Server? stackoverflow.com

PHP Fatal error: Class 'ffmpeg_movie not found.I found several archives with php_ffmpeg.dll also I have add extension=php_ffmpeg.dll in php.ini, restart the apache but nothing related with ffmpeg shows up when check phpinfo().My server is running on Windows.installing that library.I just look in error.log and found following line PHP Warning:PHP Startup:Unable to load dynamic library 'C:xamppphpextphp_ffmpeg.dll'.The specified module could not be found in Unknown on line 0 but the dll file is there.

Spell Check Error www.phpfreaks.com

I have downloaded class for spell check. and while running the file i m getting error like: Fatal error: Call to undefined function pspell_new() HP Warning: PHP Startup: Unable to load dynamic library 'C:PHPextphp_pspell.dll' - The specified module could not be found. in Unknown on line 0 i looked in to ext folder and the dll is there, in php.ini dll is already open like ext = php_pspell.dll and still getting error.

Get The GD Library Work forums.devshed.com

I've installed php in "C:php". In "php.ini" I wrote this: "extension_dir=C:Phpextensions" and deleted the two semi-commas before "php_exif.dll" and "php_gd.dll", but it doesn't work. It says "Unable to load dynamic library 'C:phpextensions/php_exif.dll'" when I run a php-script (it also says it about "php_gd.dll").What should I do?

No Symbols Loaded... visualbasic.ittoolbox.com

Hi,I have this project that i'm working on. (in VB .NET)whenever I run it, the following messages come in the output window... eventhough the application runs perfect.Any ideas????'Scoring Model': Loaded 'C:Scoring ModelinIFCI Risk Scoring Model.exe',Symbols loaded.'Scoring Model.exe': Loaded 'c:winntassemblygacsystem.windows.forms1.0.3300. 0__b77a5c561934e089system.windows.forms.dll',No symbols loaded.'Scoring Model.exe': Loaded 'c:winntassemblygacsystem1.0.3300.0__b77a5c56193 4e089system.dll', Nosymbols loaded.'Scoring Model.exe': Loaded 'c:winntassemblygacsystem.drawing1.0.3300.0__b03 f5f7f11d50a3asystem.drawing.dll',No symbols loaded.'Scoring Model.exe': Loaded 'c:winntassemblygacaccessibility1.0.3300.0__b03f 5f7f11d50a3aaccessibility.dll',No symbols loaded.'Scoring Model.exe': Loaded 'c:isk scoringmodelinaxinterop.msflexgridlib.dll', No symbols loaded.'Scoring Model.exe': Loaded 'c:scoringmodelininterop.msflexgridlib.dll', No symbols loaded.'Scoring Model.exe': Loaded 'c:isk scoring modelininterop.excel.dll',No symbols loaded.'Scoring Model.exe': Loaded 'c:isk scoringmodelininterop.microsoft.office.core.dll', No symbols loaded.'Scoring Model.exe': Loaded 'c:winntassemblygacmicrosoft.visualbasic7.0.3300 .0__b03f5f7f11d50a3amicrosoft.visualbasic.dll',No symbols loaded.Regards,===========Yuvraj Bahri ICRA Ltd. 4th Floor, Kailash Building, 26, K.G. Marg, New Delhi - 110 001 Ph: 3357940-50, Extn. - 311 Fax: 3357014 Email: email@removed email@removed Web-site: www.icra-advisory.com===========================

C# - Dynamic Loading Working Fine, Except After The Executable Is ILMerged stackoverflow.com

I have a windows application that dynamically loads DLLs using Reflection.Assembly.LoadFrom(dll_file_name_here). It works as expected, until I ILMerge the application with another DLL. So this scenario works fine: MyApp.exe MyAppComponent.dll Plugin.dll Once I ILMerge MyApp.exe and MyAppComponent.dll resulting in: MyApp.exe Plugin.dll Calling Reflection.Assembly.LoadFrom("Plugin.dll") seems to load successfully, however once I try to do anything with it eg: foreach ( typeAsm in Reflection.Assembly.LoadFrom("Plugin.dll")) I get an exception "unable to load one or more of the requested types. retrieve the loader exceptions property for more informtion". The frustrating thing is I can't really debug it, because debugging pre merging works perfectly!

Unable To Find Php_domxml.dll Error bytes.com

I have just finishing installing apache and PHP4. It is claiming that it cannot find the php_domxml.dll file giving me the following error when I go to load a page with dom xml function on it: Unknown(): Unable to load dynamic library 'C:/php/extensions/php_domxml.dll' - The specified module could not be found I am convinced that the paths are correct as I have the following line in php.ini: extension_dir = "C:phpextensions" The file, php_domxml.dll, is defininetely in the extensions folder.

Not Loading Php_pgsql.dll On Windows - Error Unable To Load Dynamic Library stackoverflow.com

PHP 5.2.8 is refusing to load php_pgsql.dll, with the following error: Warning: PHP Startup: Unable to load dynamic library 'D:PHPextphp_pgsql.dll' - The specified module could not be found. in Unknown on line 0 The .dll exists in PHP/ext/. Has anyone else had this problem with PHP on Windows before?

How Do I Get Mysqli.dll Working phpbuilder.com

I loaded mySQL 5 and am running Apache 2 and PHP 4.3.11 I tried to make a database connection using the mysqli and it bombed. So I tried adding "extension=php_mysqli.dll" to the php.ini file But now I get an error that says: "Unknown (): Unable to load dynamic library './php_mysqli.dll' - The specified module could not be found." I looked where the dll's are located and I can't find it either. What do I need to do to set this up right?

Dll Won't Load On Debug Mode. www.vbforums.com

hi guys help please...I have a vb6 project that uses a dll and that dll is located on a directory where my project resides but when i try to compile & run the application the dll wasn't loaded/found but when i create an .exe of my application and put it to where the dll resides the application sucessfully load the dll...any idea guys why this happen and how to solve this? Thanks in advance!My code to load the the DLL:Code:Public Declare Function SCardEstablishContext Lib "winscard.dll" (ByVal dwScope As Long, _ ByVal pvReserved1 As Long, _ ByVal pvReserved2 As Long, _ ByRef phContext As Long) As Long

CURL Not Loading On The CLI www.phpfreaks.com

I have been working on the CLI for a few months now and every time i go to run a script i get the following popups. QuoteRuntime Error! Program C:apache2triadphpinphp.exe.Blah Blah has made an attepmy to load the C runtime library incoorectly. Followed By: QuotePHP Warning:� PHP Startup: Unable to load dynamic library 'C:apache2triadphpextensionsphp_curl.dll' - A dynamic link library (DLL) initialization routine failed. �in Unknown on line 0 And in the PHP error log it says: PHP Warning:� PHP Startup: Unable to load dynamic library 'C:apache2triadphpextensionsphp_curl.dll' - A dynamic link library (DLL) initialization routine failed.�in Unknown on line 0 I dont know why this is. I have checked. The php_curl.dll IS there and CURL works fine and dandy on the browser applications.

Dll Extensions www.phpfreaks.com

I installed php 5.2.2 on my windows machine and apache 2.2.4. after a first configuration apache worked with php. then i installed mysql 5.0 to be able to run a cms on my machine. after some configuration tries php stopped working. apache log (the same of php.exe output) says: [Fri May 18 11:15:00 2007] [notice] Apache/2.2.4 (Win32) PHP/5.2.2 configured -- resuming normal operations [Fri May 18 11:15:00 2007] [notice] Server built: Jan� 9 2007 23:17:20 [Fri May 18 11:15:00 2007] [notice] Parent: Created child process 2516 PHP Warning:� PHP Startup: Unable to load dynamic library 'C:Program FilesPHPextphp_fdf.dll' - The specified module could not be found.are in Unknown on line 0 PHP Warning:� PHP Startup: Unable to load dynamic library 'C:Program FilesPHPextphp_interbase.dll' - The specified module could not be found.are in Unknown on line 0 Code:

Unload Dll www.vbcity.com

im using a function in a dll in vba like this:Private Declare Function myFuc Lib "C:mydll.dll".....when i compile the dll and run the vba code everything works fine, but i if i wanna change something i the dll i have to close excel before i build the dll again. Visual studio says its unable to open the dll. So i guess excel locks it in a way. how can i unlock the dll from vba?

Retrieve Keys From DLL Configuration File Not From Current EXE Configuration File? social.msdn.microsoft.com

I have 3 components : 1.Manager : dll containing Iterface definition and other things 2.Implementation: dll containing Implementation of the Interface 3.Executable: (maybe this one could be a external application or another dll using the libraries) I have particular methods (iside the interface dll file) that extract information of real Implementation from AppSettings keys in order to instance it using reflection. I use the Manager inside the Excecutable, but when I try to retrieve a especific key defined in "Manager.dll.config" (appSettings), the value returned is empty because the configuration file used is "Excecutable.exe.config" I need this configuration information in Manager config file because this Manager will be used from other programs and the configuration must be centralized into that config file to replicate the possible changes to every app calling this dll.How can I to specify that the ConfigurarionManager.AppSettings must extract values from manager.dll.config file?

What Exactly Is The "Multi-threaded Debug DLL" Runtime Library Option Doing In VS 2008 stackoverflow.com

I have a solution in VS 2008 that creates a DLL. I then use that DLL in another application. If I go in to the DLL projects property pages and change the following configuration for a DEBUG build then the built dll no long provides the desired functionality. If I change it back and rebuild the DLL, then the DLL does provide the correct functionality: [Code]...

Architecture :: Configuration Variables To Support Multiple DLL And Web Solutions? forums.asp.net

I'm designing a framework solution DLL with reusable code that I like to use for many different projects, I want this DLL to be able to load unknown configuration variables dynamically based on the solution its running from. I like to load my config variables like this: MyConfig.MyVariableX Hopefully I can also to validate my variables when the web application loads (by type) and make sure it's not missing(otherwise Throw New ApplicationException("Missing...")) It would also be nice if I can have intellisense on these variables I want solution A (web application) to have the configuration variables and solution B (DLL) to load the variables from the configuration file in solution A I'm thinking maybe I should create a database table to hold the variables with types and stuff... What would be the best way to do it ? How can I read unknown list of variables names and values from a config file and populate my class with it on runtime ?

Myadmin Cannot Load Mysql Extension phpbuilder.com

i download php-5.2.3-win32-installer.msi, there's a missing ext directory. now i encounter so many error. phpmyadmin error: cannot load mysql extension; please check PHP configuration Documentation open php.ini comment off extension_dir = "C:PHPext" extension=php_msql.dll extension=php_mssql.dll extension=php_mysql.dll still not working

Any One Solve The Error In The Code social.msdn.microsoft.com

hi, I am working with c# windowsa application. i want to connect to the .sdf file in button click event.I am writing this code � string str= "D:\Program Files\Microsoft Visual Studio 8\SmartDevices\SDK\SQL Server\Mobile\v3.0\Northwind.sdf"; ��������������� SqlCeConnection cn = new SqlCeConnection(str); ��������������� cn.Open(); it is not working. I am getting this error Unable to load DLL 'sqlceme30.dll': The specified module could not be found. Any help me to conncet to .sdf file Regards, venkat.

Load A Dll Only Once!! www.xtremevbtalk.com

I am using a DLL to make a library for a msn client the dll has to communicate with the main msn program the only problem is I make the DLL and every time I use this DLL in a another program instead of loading a new Class is loads the whole DLL again, I have got around this problem (for testing only) by making the dll so it can support itself as execuatable and then hitting run in VB.Then whenever I call the dll Code:Private WithEvents foo As DLLfoo.class1Private Sub Form_Load() Set foo = New DLLfoo.class1End Sub'this code must not change it doesn't with the official msn messengerIt just uses the DLL what is running in debug loads of programs can connect to the same DLL and just load new Classes and the whole thing works perfectly, now since it is impracticle to fetch VB around with every program and get users to hit play how do I do the same thing in code I tried:shell 'gets a windows errorrenaming dll to exe 'gets same error abovecreateobject... 'new dlls just get loaded anyway'not doing anything same answer as above

MySQLPHP Warning: Startup: Unable To Load Dynamic Library www.sitepoint.com

I get this readout when installing wordpress and joomla. I can look in the folder on my server where it says it can't find these and they are there. C:PHPext and all these files exist. So why can't it find them? achine is win2k3 IIS6 and the latest PHP build as of today. Database Error: Unable to connect to the database:Could not connect to MySQLPHP Warning: PHP Startup: Unable to load dynamic library 'C:PHPextphp_oci8.dll' - The specified module could not be found. in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library 'C:PHPextphp_pdo_oci.dll' - The specified module could not be found. in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library 'C:PHPextphp_pdo_oci8.dll' - The specified module could not be found. in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library 'C:PHPextphp_pdo_sqlite_external.dll' - The specified module could not be found. in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library 'C:PHPextphp_pspell.dll' - The specified module could not be found. in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library 'C:PHPextphp_sybase_ct.dll' - The specified module could not be found. in Unknown on line 0

AJAX :: Unable To Update Controltoolkit.dll? forums.asp.net

How do I remove the following error meassege:Unable to update auto-refresh reference 'ajaxcontroltoolkit.dll' , warning message error reads: Warning 1 Unable to update auto-refresh reference 'ajaxcontroltoolkit.dll'. Cannot find assembly 'C:UsersadminAppDataLocalMicrosoftVisualStudio9.0ProjectAssembliespobyanwo01AjaxControlToolkit.dll'.I:.... ajaxcontroltoolkit.dll.refresh

I Have A Question Related To The CREATE ASSEMBLY Command An How It Relates To Loading An Interop Dll social.msdn.microsoft.com

I have a question related to the CREATE ASSEMBLY command an how it relates to loading an interop dll. I created an interop dll to wrap the inkobj.dll. I loaded the assembly into sql server using CREATE ASSEMBLY WITH Interop.MSINKAUTLib.dll ... Then I used Sql Server Management Studio to Generate a CREATE ASSEMBLY WITH 0x........� script so I could install the assembly in other databases without having to have the dll files. � I thought the interop was just a wrapper and you still need to "load" the dll that the interop wrapped. However, the Inkobj.dll is not loaded and the clr procedure�I created to call the ink routine still works. � My question is this: � Does an interop dll contain all of the code it needs and does not depend on the wrapped dll. (Like the way static linking worked in the day) � OR�does the CREATE�ASSEMBLY load the wrapped dll with the interop � OR am I just confused? � � �

Loading A ActiveX Dll From A Given Path www.codeguru.com

Does anyone know if I can load a ActiveX DLL from a given path, or can I only load globaly registered Dll's ??

How To Test For Controls That Are Not Loaded www.vbforums.com

How do you test for controls in a dll. The control names are not loaded in the dll but are loaded in a form passed to the dll.ex.Dim ctl as ControlTypeOf ctl Is ImageListNow the ImageList control is not loaded in the dll (so the name is not available and will not compile) but is loaded in the calling program. Is there like an enum or list of controls that can be used so that the dll can be compiled?

Crystal Reports :: An Error Occurred During The Processing Of A Configuration File Required To Service... forums.asp.net

I have a ASP Web App that has been fine when deployed but now I've introduced Crystal Reports to it and is fine when testing. On my Web Setup Project Ive right clicked, Add, Assembly and included:- CrystalDecisions.Reportsource.dll CrystalDecisions.Shared.dll CrystalDecisions.web.dll Ive run the setup on an pc away from the development environment but when connecting I get:- Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. review the specific error details below and modify your configuration file appropriately. Parser Error Message: Could not load file or assembly 'CrystalDecisions.Web, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified. Source Error: [Code].... Source File: C:inetpubwwwrootMala_Ordersweb.config Line: 52 Assembly Load Trace: The following information can be helpful to determine why the assembly 'CrystalDecisions.Web, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' could not be loaded. [Code]....

INNO DLLRegisterServer Error www.xtremevbtalk.com

I seem to have my Inno Setup working correctly except for when the program goes to install on another machine it gives me this error on these files "RDOCURS.DLL, Riched32.DLL, Asycfilt.DLL and VB6STKIT.DLL which i dont think i nedd tell me if i'm wrong". The Error is ("C:/Windows/System32/"DLL NAME" Unable to register the DLL/OCX: DllRegisterServer export not found.")Has anyone run into this problem before ? Can anyone give me any sugestions on what to do?

Deploying Program Can't Find Dlls In Same Folder stackoverflow.com

I wrote a program in VB.NET which uses several .dlls that I programed in c++. The dlls wrap some functions from an old version of the program. On my development computer everything works fine but I build a release version, copy it and the dlls onto the target machine and the .exe starts up fine. When the program tries to use a function from the .dll it throws an exception and says "unable to load DLL "c:/the path/my.dll" the specified module can't be found."I don't know if it makes any difference, but I am defining the dll functions in the main vb project using:Declare Function MyFunction Lib "c:/the path/my.dll" (ByVal in1 as Double, ByRef out1 as Double) as Integer.I have checked the .net framework on the target and version 4 seems to be installed same as the development computer. Both are windows XP machines. I have no idea if it is the way I programmed the .dlls or just something with my vb.net project.

Unable To Load Dll Mapscript_48.dll www.codingforums.com

I get this error.... Warning: dl() [function.dl]: Unable to load dynamic library '/ms4w/Apache/php/ext/php_mapscript_48.dll' - The specified procedure could not be found. in C:ms4wappsgmaphtdocsgmap75.phtml on line 56 Fatal error: Call to undefined function ms_GetVersion() in C:ms4wappsgmaphtdocsgmap75.inc.php on line 51 I'm tryin to get an application I didn't design 2 work. php_mapscript48.dll exists at the location. What do I try next? I've never dealt with dll's in php before.

Getting The GD Library Running phpbuilder.com

I have php 4.3.10 installed on WinXP/IIS. I am able to run php without any problems but now I am wanting to explore using the GD Library. I uncommented 'extension=php_gd2.dll' from the php.ini file but when I run php I get the error: "PHP Warning: Unknown(): Unable to load dynamic library './php_gd2.dll' - The specified module could not be found." I have already made sure all the dll files from my php directory are copied over to windows/system32. What am I missing?

DllRegisterServer Entry Point Was Not Found www.vbforums.com

I have written an app that uses an ActiveX.exe. when i built the file it generated a Dll.I have no problems when i am using the file on the computer i created the app but when i package and distibrute the app it doesnt work. On closer investigation i have found that the application is unable to create the ActiveX object.If i try to register the dll file manually i get the following error:my.dll was loaded, but DllRegisterServer entry point was not found.What could the error be?

Loading Php_openssl.dll phpbuilder.com

When I run PHP, I get the warning: PHP Startup: Unable to load dynamic library 'C:PHPextphp_openssl.dll' -The specified module could not be found. In php.ini I have: extension_dir = "C:PHPext" ... extension=php_openssl.dll And I have php_openssl.dll in ext so I don't know what the problem is.

Executing A DLL From SQL Server? stackoverflow.com

we want to write a DLL using VB.NET 2008 using .Net 3.5 that performs an HTTP request we then want to call the DLL From SQL Server 2005 (in a trigger) and pass the DLL some variables and get a return value.Where im at in the process.I have created the DLL 'HTTPDLL.dll' Source: Imports System Imports System.Configuration Imports System.Collections.Generic Imports System.Text [code]..... Perhaps i am calling it incorrectly but i havent been able to get it to work (always return 'invalid class string')

IDE :: The Structure Of Visual Studio 2010? social.msdn.microsoft.com

Each time i type codes in the Visual Basic 2010 IDE (Visual Studio 2010 Ultimate Edition) and compile it to run, i keep getting this nasty error report below Error 1 The "GenerateResource" task failed unexpectedly. System.DllNotFoundException: Unable to load DLL 'FileTracker.dll': A dynamic link library (DLL) initialization routine failed. (Exception from HRESULT: 0x8007045A) at Microsoft.Build.Shared.NativeMethodsShared.InprocTracking.StartTrackingContextWithRoot(String intermediateDirectory, String taskName, String rootMarker) [code].....

.NET 1.1 And .NET 2 Config Files Working Together stackoverflow.com

I have inherited a rather large project consisting of an application written in VB6 and several DLL's and ActiveX controls written in VB6, VB.NET 1.1 and VB.NET 2. I want to change one of the settings for one of the DLL's written in VB.NET 2 that is in its application.dll.config file, but it seems to be having no effect.My main VB6 application (I will call it Alpha) has a configuration file (Alpha.exe.cnfig) which contains settings used by my VB.NET 1.1 DLL (which I will call Bravo). After calling Bravo, Alpha calls Charlie (my VB.NET 2 DLL). However, even though I have changed the application settings in Charlie.dll.config in the subdirectory where the DLL lives, it has no effect. I have tried putting Charlie's settings in Alpha's config file but this causes Bravo to fail with an automation error (which I think is because the format of the config files changed from .NET 1.1 and .NET 2).[code]If I try putting the applicationSettings section under directly beneath the appSettings section (i.e. as another child element of the configuration element) in Alpha.exe.config then Bravo.dll fails.

Active Directory/LDAP :: Unable To Load DLL 'activeds.dll'? forums.asp.net

when i try to programmatically create website in IIS and add host name in DNS.......it return me this error...... Unable to load DLL 'activeds.dll': A dynamic link library (DLL) initialization routine failed. (Exception from HRESULT: 0x8007045A) may i know what is this problem and and how can i solve this problem .

PHP 5.2.8 Update www.webhostingtalk.com

Did anyone have this problem when upgrade to PHP 5.2.8? This is the error that i got when i upgrade from PHP 5.2.6 to 5.2.8. "Failed loading C:PHP5ioncubeioncube_loader_win_5.2.dll PHP Warning: PHP Startup: Unable to load dynamic library './ext/php_mssql.dll' - The specified module could not be found. in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/php_msql.dll' - The specified module could not be found. in Unknown on line 0 " I don't have Ioncube install and when i upgrade from PHP 5.2.5 to 5.2.6. I didn't have the above problem. Is Ioncube a included .dll in for the Windows package? How do i fix the above error? Is there any problem with PHP 5.2.8? Is it stable? My server is Win2003 Standard/IIS6.

SQLExpress Re-Install Problem social.msdn.microsoft.com

This morning I booted to a message "Unable to load SQLBOOT.DLL (hresult 0x8007007e).� Uninstall and re-run setup."�� When I did the uninstall, I got a couple of error warnings re sqlboot.dll. � When trying to re-install, the install hangs up at MSXML6 with the message "Unable to find MSXM16.msi install package."� I've looked at the files in the install directory and the .msi package is there.� I've tried it twice with the same results.� � Any help would be appreciated. � Don Seydel

Loading Php_ldap.dll On Windows NT4 forums.devshed.com

Okay all of my other extensions load correctly but when I try to load the php_ldap.dll, I get the following error: Quote: Unable to load dynamic library 'd:/php/extensions/php_ldap.dll' - The specified module could not be found. Do I need some sort of LDAP library installed on my machine...all I want to do is connect to an external ldap server.

Windows - XDebug Is Not Loaded Vista, Apache Module? stackoverflow.com

I downloaded php_xdebug-2.0.5-5.3-vc9.dll, added at the end of PHP.ini the following line: zend_extension_ts="C:/Program Files/php5/ext/php_xdebug-2.0.5-5.3-vc9.dll"hen I use phpinfo(), xdebug is not loaded.When I run command "php.exe -m", it not loaded as well.How can this be resolved?My configuration: PHP 5.3.1, Apache 2.2.14 with Apache Module, OS: Windows VistaBoth php and xdebug are thread safe.

VS2010 Assembly Load Error stackoverflow.com

I am getting the following error when I try to build an ASP.NET 4 project in Visual Studio 2010: "Could not load file or assembly 'file:///C:Devproject runkinElmah.dll' or one of its dependencies. Operation is not supported. (Exception from HRESULT: 0x80131515)". I have verified that the dll does, in fact, exist, and is getting copied to the bin folder correctly. I have also tried removing and then re-adding the reference to the project. The build only fails when I switch the Solution Configuration to "Release". It does not fail when the Solution Configuration is set to "Debug". The only difference between the two configurations (that I know of) is shown in the following Web.config transform, Web.Release.config: <?xml version="1.0"?> <configuration xmlns:xdt="[URL]"> <connectionStrings> <add name="SqlServer" connectionString="" providerName="System.Data.SqlClient" xdt:Transform="SetAttributes" xdt:Locator="Match(name)"/> </connectionStrings> <system.web> <compilation xdt:Transform="RemoveAttributes(debug)" /> <customErrors mode="On" xdt:Transform="Replace"> <error statusCode="404" redirect="lost.htm" /> <error statusCode="500" redirect="uhoh.htm" /> </customErrors> </system.web> </configuration> I have tried using Fusion Log Viewer to track down the assembly binding issue, but it looks like it is finding and loading the assembly correctly. Here is the log: *** Assembly Binder Log Entry (6/8/2010 @ 10:01:54 AM) *** The operation was successful. Bind result: hr = 0x0. The operation completed successfully. Assembly manager loaded from: C:WindowsMicrosoft.NETFrameworkv4.0.30319clr.dll Running under executable c:Program Files (x86)Microsoft SDKsWindowsv7.0AinNETFX 4.0 Toolssgen.exe A detailed error log follows. Pre-bind state information === LOG: User = User LOG: Where-ref bind. Location = C:Devproject runkinElmah.dll LOG: Appbase = file:///c:/Program Files (x86)/Microsoft SDKs/Windows/v7.0A/bin/NETFX 4.0 Tools/ LOG: Initial PrivatePath = NULL LOG: Dynamic Base = NULL LOG: Cache Base = NULL LOG: AppName = sgen.exe Calling assembly : (Unknown). LOG: This bind starts in LoadFrom load context. WRN: Native image will not be probed in LoadFrom context. Native image will only be probed in default load context, like with Assembly.Load(). LOG: No application configuration file found. LOG: Using host configuration file: LOG: Using machine configuration file from C:WindowsMicrosoft.NETFrameworkv4.0.30319configmachine.config. LOG: Attempting download of new URL file:///C:/Dev/project/trunk/bin/Elmah.dll. LOG: Assembly download was successful. Attempting setup of file: C:Devproject runkinElmah.dll LOG: Entering run-from-source setup phase. LOG: Assembly Name is: Elmah, Version=1.1.11517.0, Culture=neutral, PublicKeyToken=null LOG: Re-apply policy for where-ref bind. LOG: Where-ref bind Codebase does not match what is found in default context. Keep the result in LoadFrom context. LOG: Binding succeeds. Returns assembly from C:Devproject runkinElmah.dll. LOG: Assembly is loaded in LoadFrom load context.

DLL Memory Usage www.xtremevbtalk.com

HiMaybe a simple question, but I wrote a program which controls an automated system and it supports alot of different interfaces from different manufacturers and each interface has its DLL. Currently I have 15 DLL files and I was wondering if each DLL is loaded into memory when the program starts? If so is their a way to only load the needed DLL (only one interface can be selected, so only one DLL file needs to be loaded)Thank you very muchRaph

Custom Data Flow Components, DllImport, And Third Party Dlls social.msdn.microsoft.com

I've been having an issue with the integration of a third-party DLL into a custom data flow component. � The company sent me a C# project that generates a simple console application.� The project includes a class that calls their DLL with DllImport.� The console application runs fine. � I created a stand-alone class using the C# class they sent to expose the methods of their DLL.� In my custom component, I'm referencing this class to pass data to and from their DLL.� � The first method from that stand-alone class that my component encounters simply gets their installation path from the registry and does not use DllImport.� That path retrieval works fine.� The next method calls a function that is declared with DllImport.� Each time the call fails with "System.DllNotFoundException = {"Unable to load DLL AMZip.dll': Exception from HRESULT: 0xE06D7363"}". � I've copied this DLL to countless locations (e.g., the PipelineComponents directory, the project/solution bin directory) and included these paths in all manner of path variables.� � What am I missing here?� Their DLL is not strong named (does this matter since I'm using DllImport?), my stand-alone class is, and of course, the custom component itself is.�I appreciate the help.

Can&#39;t Use Stored Procedure Xp_sendmail forums.databasejournal.com

French Message 'Impossible de charger la DLL sqlmap70.dll, ou l'une des DLL auxquelles elle fait r�f�rence. Raison : 182(error not found).' = 'Impossible to load the DLL sqlmap70.dll, or one of the DLLs which it has references. Reason : 182(error not found).' Also, the dll sqlmap70.dll is on the disk ! I work with sql server 2000 and I use my local engine (installation desktop edition) Thanks for your answers Best regards Axel

5.2.6 And Apache 2.2 Can't Load MySQL / PgSQL Extensions www.phpbuilder.com

I have installed Apache 2.2.8 and PHP 5.2.6, but it seems there is a problem when I uncomment one of the lines: extension=php_mysql.dll extension=php_pgsql.dll I'm getting the following errors: PHP Startup: Unable to load dynamic library 'C:programsphp-5.2.6extphp_mysql.dll' - The specified module could not be found. 'C:programsphp-5.2.6extphp_pgsql.dll' - The specified module could not be found.[/i] I really don't know what the hell should I do anymore, because the loaded files are there. In httpd.conf, I have add the following lines (php code is working): LoadModule php5_module "C:programsphp-5.2.6php5apache2_2.dll" LoadFile C:/programs/php-5.2.6/php5ts.dll PHPIniDir "C:programsphp-5.2.6" AddType application/x-httpd-php .php AddType application/x-httpd-php-source .phps In php.ini I have set the following line: extension_dir = "C:programsphp-5.2.6ext"

Configuration :: How To Compose Website With External Aspx Page forums.asp.net

I have a simple webApplication. Now I have a second webapplication with few web aspx pages. When I build each project I get aspx files with 1 dll per project. Now the structure of the first webApplication is like this inwebapplication1.dll Default.aspx Is it possible to load the dll of the second application dynamically and put its dll into the bin directory. The result will be something like this: inwebapplication1.dll inwebapplication2.dll Default.aspx application2default.aspx The problem is that when I try to open application2default.aspx the compiler is throwing an error that it cannot find the class for that particular page because the assembly inwebapplication2.dll is not loaded. I tried to load the assembly from the web config like this <add assembly="myassemly, Version=, PublicKeyToken=null, Culture=neutral"/> and also from the code like this Assembly.LoadFrom( @"D:Projectsinmyassemly.dll" ); OR Assembly.Load( "myassemly, Version=, PublicKeyToken=null, Culture=neutral" ); but I still have no success. Can u tell me what is the logic here with the assembly load?

Custom Assembly : Retrieving Data From From Configuration File. social.msdn.microsoft.com

Hi all, my problem is that: I do read informations (e.g. connectionString) from configuration file by one custom assembly. My environment is RS2005, VS.NET 2005 Prof.Edition, WIN2003 Server SP1, .NET Framework 2.0.50727 The scenario is that: A text box into my report require a function contained into MyCustom.dll. This code do read information from MyCustom.dll.config. This file contains: <?xml version="1.0" encoding="utf-8" ?> <configuration> �<connectionStrings> ��<add name="IS2009cfg" connectionString="data source=servernameinstancename;initial catalog=dbname;user id=xx;password=yy;" /> �</connectionStrings> �<appSettings> ��<add key="DefaultHeaderLogo" value="This is a test" /> �</appSettings> </configuration> Using ConnectionStringSettings conn = ConfigurationManager.ConnectionStrings["IS2009cfg"]; the result is null. Also using string defaultHeaderLogo = ConfigurationManager.AppSettings["DefaultHeaderLogo"]; the result is null. MyCustom.dll and MyCustom.dll.config are located into locations of Report Server and Report Designer, with this Build Events on succesfully build: rem Copy custom assembly to ReportDesigner location... copy "...mydeveloplocation...inDebugMyCustom.dll" "C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMyCustom.dll" copy "...mydeveloplocation...inDebugMyCustom.dll.config" "C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMyCustom.dll.config" rem Copy custom assembly to ReportServer location... copy "...mydeveloplocation...inDebugMyCustom.dll" "C:Program FilesMicrosoft SQL ServerMSSQL.4Reporting ServicesReportServerinMyCustom.dll" copy "...mydeveloplocation...inDebugMyCustom.dll.config" "C:Program FilesMicrosoft SQL ServerMSSQL.4Reporting ServicesReportServerinMyCustom.dll.config" The question is simple: where I do locate configuration file for obtain value during report execution? Many thank's in advance Claudio Barca Turin - Italy � � �

Loading A DLL Dynamically www.vbforums.com

If you don't know the name of the function at runtime that you need then the dll is pretty much useless to you. Though there is a way to find out all the functions in a dll (load it up in a hex editor and look towards the end of the dll).If you want a plug-in type archetecture like netscape or ie, you need to design an interface (a blank class with all the functions you will need a dll to support compiled into a dll) that any new dll will use (implements <interface name>). This way, if you need the dll to run code that modifies something, you pass the data to a known function that is available to any dll you load.To load a dll that you don't know about until runtime, keep an ini file, a registry setting, or some other way to store the dll names in and do something along these lines:Code:Dim myDLL As ObjectSet myDLL = CreateObject(myDLLName & "." & myDLLObject)I'm fully unsure if this will work, but you can give it a try

Sharing Data Between Multiple Projects In Single Application? www.daniweb.com

I have a windows forms application with one exe and several dlls(Class libraries) in a single solution. The application uses common data that is used across all the dlls. I would like to load the data when the application is starting up and use the loaded data at various points in the dlls so that I do not have to load the common data again and again. How can I share the data loaded in main EXE across the DLLs?

Having Problems Getting Mysqli Installed On PHP 5.2.1 bytes.com

I am having problems getting Apache 2.2.4 to read the php_mysqli.dll file some my C:phpext directory. The following is the error that Apache displays in the error log: PHP Warning: PHP Startup: Unable to load dynamic library 'C:/php/ext/ php_mysqli.dll' - The specified procedure could not be found. in Unknown on line 0 The file is in the directory, but Apache won't load the file.

VS 2008 : Dynamic Object Creation From Dll? www.vbforums.com

I am trying to get the hang of Dynamic loading of objects from assemblies on the same machine (But NOT part of the same project).In the sample below, Form1 implements an interface built as part of the .dll I placed in C:Release. I am trying to create a local instance of Form1, and Cast it as Iform, so that the local code can access the properties and methods exposed by the interface.The assumption here is that at runtime, local code will have access to the String name of a form, and an interface which is implemented by the form (and is compiled into the .dll as well as the client application), and that is it. When I run this code, I get a exception: "Unable to cast object of type 'WindowsApplication1.Form1' to type 'WindowsApplication1.Iform'. Public Function fApplicationObject() As Iform Dim sLocation As String = "C:ReleaseWindowsApplication1.dll" Dim sType As String = "WindowsApplication1.Form1" [code].... I seem unable to dynamically load an object from a dll and then utilize an interface to access it's properties and such.

Deployment :: Reflection Error Loading Assembly? www.vbdotnetforums.com

i am writing a simple games client using an XNA 2.0 engine to play games. The games are written in dll files and the client uses the assembly.loadfrom method to read and execute the games accordingly...Now this all works fine on my computer and my laptop. However when i give it to my friend he gets this error and the dll doesnt load - "Unable to load one or more of the requested types. Retrieve the loader exceptions property for more information"

SQL Reporting :: SSRS Print On Client Machines? forums.asp.net

Initially after deploying SSRS 2005 report on server, the client machine could not avail print functionality because of the error "Unable to load client print control". Inspite of allowing ActiveX installation, the print functionality was not working. Googling on this issue I found that rsclientprint.dll needs to be registered in C:Windowssystem32.successfully registering this dll, print functionality started working on some machines. However on some machines it started giving the error 'Error loading resource library.(0x8007007E)'.

Loading Application - Error - Unable To Load DLL 'VSPerf100.dll': The Specified Module Could Not Be... stackoverflow.com

I have an asp.net 3.5 application. When i try to load the application it says: Exception Details: System.DllNotFoundException: Unable to load DLL 'VSPerf100.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E) The application works fine on my win 7 machine. i tried the same on win server 2008 r2 where in i get the above message.

Unable To Load Dynamic Library bytes.com

When I try to connect to mysql, I get: Fatal error: Call to undefined function mysql_connect() in D:wwwkviz scriptsdata_connect.php on line 3 PHP Warning: PHP Startup: Unable to load dynamic library 'C:PHPext php_mysql.dll' - The specified module could not be found. in Unknown on line 0 BUT, the interesting thing is that in my C:PHPext there exists php_mysql.dll. Sooo, why can't PHP load it?

Error Messages When Installing An Application www.vbforums.com

Hi all. I am a new VB developer. I have built an application in VB 6 which is pretty simple - just presents Access database data using ADO, and outputs a report to Word. I compiled the project and used the Package and Deployment Wizard to make a setup program (all on Win 2K). I then tried to install the program on my Win 98 installation (I have a dual boot machine). I got the following error messages - the destination file is write protected for stdole2.tlb, asycfilt.dll, oleaut32.dll.Then the installation went to an install for MS Data Access Components 2.0 setup. This installation produced the following errors:Error Title: Unable to call DllRegisterServerError Message: Unable to load file 'C:Program FilesCommon FilesSystemOLE DBMSdasql.dll' to register it.Error Title: Error while configuring ODBC driversError Message: Unable to register library C:Program FilesCommon FilesSystemOLE DB\msdasql.dll: The operation completed successfully. This is pretty confusing to say the least. Can anyone tell me how to proceed from here?! Any help appreciated. Cheers, Ben

Loading Extensions With IIS phpbuilder.com

Whenever I try to load ANY extension by uncommenting it I get PHP Startup: Unable to load dynamic library 'C:phpextphp_extension.dll' - Access is denied. This isn't the common "php_mysql.dll" problem because I got that working with Apache fine (I'm migrating to IIS), but this won't work with ANY extension...

[20% Resolved] How To Distribute Reference DLL www.vbforums.com

My project uses WBCustomizer.dll.I assembled all the required ocx files and WBCustomizer.dll into the same folder as the application and distribute it to another computer..But my program can't load WBCustomizer.dll on another computer. Please help.It seems that ocx files are ok.But my program is still trying to load WBCustomizer.dll with the absolute path C:/windows/system32/WBCustomizer.dll instead of relative to the folder...

Startup Error phpbuilder.com

Ive been using PHP (5) with mysql (4.1.13) on apache (2.0.54) for a while now with no problems (around four months). Then for some reason get this error when i start my PC: ---------------- Warning PHP Startup: Unable to load dynamic library './ext/php_mysql.dll' - The specified procedure could not be found ---------------- I cant develop any websites now as i cant connect to any databases! Does anyone know why this might have happened and how to re-load the php_mysql.dll ?

.NET, But Not To DLL Creation (C++)? www.vbforums.com

I am new to VB .NET, but not to DLL creation (C++).I am trying to create a DLL using VB .NET (2008) and I need to execute some code when the DLL loads. I am trying to do this in DllMain, but I don't see how to get DllMain to execute when the DLL is loaded. I don't see anywhere that the DllEntryPoint can be set in a VB .NET DLL.

.NET Using Interface, Reflection, And DLL To Access Main Form Controls Properties? stackoverflow.com

I have a main form, a separate plugin interface dll and another separate dll. Now this is my problem:I'd like to access the properties of the controls of the main form for manipulation in the other dll. Example: MainForm Plugins.dll Data.dll Main form have label control I define properties in the interface Plugins.dll from Data.dll I load Plugins to read the label control from the mainform.The question is how can I do that?

Debugging Assembly Load In C# stackoverflow.com

I created two projects. They are VB.Net dll and c# .net dll file. I am using VB.net dll file into c#.dll file. when i test c#.net dll file it is giving error message Could not load assemble. if i use both then it is working fine.But i have to use only one dll file. Let me know how can i do with only c#.net dll file.

Cant Import System.web.configuration To Dll Classes forums.asp.net

i have a problem in importing the system.web.configuration namespace in my dll classes while it works fine in the partial classes web pages but not my own created classes

Installing Secure Shell2 Functions, Unable To Load Dynamic Library bytes.com

I have Apache 2.0.54 and PHP 5.0.4 running on XP Professional. Everything is working ok but when I am tryin to add the extension php_ssh2.dll into use the PHP will generate an error message: PHP Warning: PHP Startup: Unable to load dynamic library 'c:/php5/ext/php_ssh2.dll' - The specified module could not be found. in Unknown on line 0 ON httpd.conf I have LoadModule php5_module "c:/php5/php5apache2.dll" AddType application/x-httpd-php .php ON php.ini extension_dir=c:/php5/ext/ extension=php_ssh2.dll I've downloaded php_ssh2.dll from http://snaps.php.net/win32/PECL_5_0/php_ssh2.dll and the file is located in C:php5extphp_ssh2.dll Does anyone has any idea what is wrong?

Configuration :: URL ReWriting - Extension Less Not Work - Add Dll From Web.config File? forums.asp.net

I am working on url rewriting all is working fine on my local machine when i upload this site on production server the link of url rewrite which is extension less not work. i search the multiple solution in the google one solution is that insert the aspnet_isapi.dll in the properties->virtual directory tab->configuration->insert aspnet_isapi.dll site in working, but problem is that hosting provider refuse to add this dll. tell me alternate solution to add this dll from web.config file.

Compile A .cs File Into A .dll? forums.asp.net

I have a project with a dll in it that i believe has some incorrect configuration information in it. I have a .cs file that i believe contains the functions that the dll contains and want to update the .cs file and recompile to a dll....is this even possible? The site was previously a 1.1 site that i upgraded to 2.0 and have no documentation as to how the current .dll file was created.

VB6 MMC Snap-in And XP Visual Styles www.vbforums.com

GreetingsHow do I incorporate XP's & .NET Visual Styles into the VB6 MMC DLL snap-in?I can create a stand-alone VB6 application with XP styles using the .manifest file structure. When plugging into the MMC DLL interface and renaming the manifest file to <program name>.dll.manifest I am unable to get visual styles and it reverts back to the 2000/NT/98 look.I have been unable to get information about this exact procedure from Microsoft's website. Assistance on this is greatly appreciated.-Todd

Architecture :: Dynamically Loading User Control From Dll? forums.asp.net

I need to dynamically load a usercontrol which is published in a dll. if I prepare user control in a asp.net web site and get dll by publishing the site, I can dynamically load the user control from dll hovewer if I did same thing in a asp.net web project, publish it and get dll the user control in dll cant be loaded dynamically here is the sample code: [Code].... The code is not working when IIOrnekWebProject.dll is created from web project. But if I use the dll from web site, the code above is working. How can I load user control in web project dll ?

Referencing DLLS In The GAC And Policy Files? www.vbforums.com

I have a project/app released which references a dll from the GAC folder. The project is looking for version 1.0 of the referenced dll. I want to release version 2 of the dll without having to re-release the app and have all users re-install. I had thought if i deployed a policy with the new dll which redirected calls for the dll to the new version this would be ok. However I think I am missing something. IT seems the redirect is not working as when I test on a users machine, give them the version 2 dll and the policy dll but take away the version 1.0 the app fails. It seem calls to the missing dll are not redirected by the policy dll to version 2. Policy config which is used to create the policy.1.1.CorpReportsClassLibrary.dll is as below. <configuration> <runtime> <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1"> [Code]....

Configuration :: Error Occurred Loading Configuration File - Failed To Map Path forums.asp.net

An exception of type 'System.Configuration.ConfigurationErrorsException' occurred in System.Configuration.dll but was not handled in user code Additional information: An error occurred loading a configuration file: Failed to map the path '/'. It started when i installed silverlight 3.0 Is there any fix for this. im getting error in this code: rootWebConfig = WebConfigurationManager.OpenWebConfiguration("~/"); Configuration

Cannot P/Invoke SQLCEME30.DLL When Debugging Pocket PC 2003 SE Emulator social.msdn.microsoft.com

I'm trying to debug an assembly with System.Data.SqlServerCe - and when I deploy to a IPAQ 2210 - I get no errors! Alas, when I try to debug using the Pocket PC 2003 SE Emulator - I get the "cannot P/Invoke SQLCEME30.DLL" exception. Can anyone offer directions? best regards, Walther

Lost Ability To Debug CLR Stored Procs After SQL 2005 Upgrade To SP1 social.msdn.microsoft.com

OS: Windows XP Pro, SP2 SQL: SQL Server 2005 (Server 9.0.2047) SP1 VS: Visual Studio 2005 RTM.050727-4200 -------- After upgrading our SQL Servers to SP1 we have lost the ability to debug .net CLR stored procedures.� The debugging process worked fine until we installed the Service Pack.� All other features we use test out fine after the upgrade. The only and very important feature that does not work is debugging CLR procs.� In fact this problem is happening in every environment we have. Be it SQL2005 running on Windows XP SP2, Windows Server 2003 SP1, Window Server 2000 SP4.� SQL Server remote or local on the machine doing the debugging.� All 5 developer workstations with Visual Studio in virtual machines or installed on in base OS are behaving exactly the same. Every developer on our team has the exact same problem regardless of their configuration after the upgrade to the service pack 1.� All developers and environments were working correctly before the upgrade. Even building a new SQL box from scratch and installing all tools and creating a new clean database we fail with same error. We� have verified CLR Debugging is enabled for the database connection.� We have dropped the connection and recreated it.� Here is an example of the output from the output window: This is the output up to the CLR call The thread 'sql_test2 [62]' (0x68c) has exited with code 0 (0x0). The thread 'sql_test2 [62]' (0x68c) has exited with code 0 (0x0). Auto-attach to process '[1072] [SQL] sql_test2' on machine 'sql_test2' succeeded. Output AFTER the CLR Call Auto-attach to process '[1072] sqlservr.exe' on machine 'sql_test2' succeeded. 'sqlservr.exe' (Managed): Loaded 'C:WINNTassemblyGAC_32mscorlib2.0.0.0__b77a5c561934e089mscorlib.dll', No symbols loaded. 'sqlservr.exe' (Managed): Loaded 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnSqlAccess.dll', No symbols loaded. 'sqlservr.exe' (Managed): Loaded 'C:WINNTassemblyGAC_32System.Data2.0.0.0__b77a5c561934e089System.Data.dll', No symbols loaded. 'sqlservr.exe' (Managed): Loaded 'C:WINNTassemblyGAC_MSILSystem2.0.0.0__b77a5c561934e089System.dll', No symbols loaded. 'sqlservr.exe' (Managed): Loaded 'C:WINNTassemblyGAC_32System.Transactions2.0.0.0__b77a5c561934e089System.Transactions.dll', No symbols loaded. 'sqlservr.exe' (Managed): Loaded 'C:WINNTassemblyGAC_MSILSystem.Security2.0.0.0__b03f5f7f11d50a3aSystem.Security.dll', No symbols loaded. 'sqlservr.exe' (Managed): Loaded 'C:WINNTassemblyGAC_MSILSystem.Xml2.0.0.0__b77a5c561934e089System.Xml.dll', No symbols loaded. 'sqlservr.exe' (Managed): Loaded 'CIS_Release6a', No symbols loaded. 'sqlservr.exe' (Managed): Loaded 'C:WINNTassemblyGAC_MSILMicrosoft.VisualBasic8.0.0.0__b03f5f7f11d50a3aMicrosoft.VisualBasic.dll', No symbols loaded. 'sqlservr.exe' (Managed): Loaded 'C:WINNTassemblyGAC_MSILSystem.Configuration2.0.0.0__b03f5f7f11d50a3aSystem.Configuration.dll', No symbols loaded. Program Locks up with blank screen and hangs.� If we stop the Debugging then the correct results will appear in the output window. Column1 ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- <CIS><Header><MessageType>FosterParent</MessageType><Status>-1</Status><ErrorMsg><Code>-100</Code><Description>Requested Record Not Available</Description></ErrorMsg></Header></CIS> No rows affected. (1 row(s) returned) @RETURN_VALUE = Finished running [dbo].[qsp_FF_FD_FP_FosterParent]. Any ideas? TIA �

Sql Server - IIS 7 - Unable To Load Dynamic Library stackoverflow.com

I installed PHP and PHP Manager on my IIS machine through the web installer thing. I can run a web page with php in it fine, but it wont load libraries correctly. I want to connect to an MS SQL database, so i got the dll and put it in the ext folder but it wont load: PHP Warning: PHP Startup: Unable to load dynamic library 'C:PHPextphp_sqlsrv_52_ts_vc6.dll' - The specified module could not be found. in php.ini the extention_dir is set to C:/PHP/ext, and the file is there. In fact it spits out an error for every single external dll referenced which is like 10 of them, but they are all there. Edit: I fixed this issue by manually downloading version 5.3.3 of php off of the php for windows website. I then pointed iis to the new exe and had it load the 53 vc9 version of sqlserv dll. It ended up working.