Logo

Advertisement

Bold, Underline And Italic Greyed Out

www.excelforum.com

My spreadsheet is locked and protected, and i have found out that the BOLD, underline and italic functions have been disabled, is there anything i could do via VBA to keep these functions active,...????

View Answers
Very similar questions

Advertisement

VS 2008 - Create A Page Where A User Can Type A Document And Have It Be Bold Italic Or Underlined? www.vbforums.com

I am trying to create a page where a user can type a document and have it be bold italic or underlined. When the user clicks on bold and italic it should be bold and italic. when they are not clicked it should not be. I am having trouble finding a stable solution. I can only seem to change it to either bold or not bold or italic or not italic and not bold and italic.

Use Multiple Combinations Of Font Styles? stackoverflow.com

If I want to set my Font I can use new Font=("Times New Roman", 12, Drawing.FontStyle.Bold)Instead of Bold, I can use Italic, Regular or Underline

C# - Set Multiple FontStyles When Instantiating A Font? stackoverflow.com

In looking at the constructors for the System.Drawing.Font class there is a parameter to pass in one of the FontStyles defined in the System.Drawing.FontStyle enum. ie. Bold Italic Regular Underline and there are boolean properties for Bold, Italic, Underline etc. in the instantiated object, but they are read only. What if I want to define my font to have multiple styles like Bold and Underline?

Note Editor www.vbforums.com

I made myself a little note editor and I did so that when you save a file, it saves the bold, italic, underline and size variables in a file. Then, when I oipen the file everything works fine... until I close my application..... when I close it and re-open it (the application) and then try to open my file again, the bold, italic, underline and size are gone!!! how come??VB Code:Option ExplicitDim Bold As BooleanDim Italic As BooleanDim Underline As BooleanDim Size As Integer Private Sub Form_Load()Bold = FalseUnderline = FalseItalic = FalseSize = 1End Sub Private Sub mnuFileExit_Click()'Make sure user really wants to exitDim Response As IntegerResponse = MsgBox("Are you sure you want to exit the note editor?", vbYesNo + vbCritical + vbDefaultButton2, "Exit Editor")If Response = vbNo Then  Exit SubElse  EndEnd IfEnd Sub Private Sub mnuFileNew_Click()'If user wants new file, clear out textDim Response As IntegerBold = FalseUnderline = FalseItalic = FalseSize = 1Response = MsgBox("Are you sure you want to start a new file?", vbYesNo + vbQuestion, "New File")If Response = vbYes Then txtEdit.Text = ""End Sub Private Sub mnuFileOpen_Click()cdlFiles.Filter = "Files (*.ned)|*.ned"cdlFiles.DefaultExt = "ned"cdlFiles.DialogTitle = "Open File"cdlFiles.Flags = cdlOFNFileMustExist + cdlOFNPathMustExistOn Error GoTo No_OpencdlFiles.ShowOpenOpen cdlFiles.FileName For Input As #1txtEdit.Text = Input$(LOF(1), 1)Close 1Open cdlFiles.FileName For Input As #2Input #1, Bold, Italic, Underline, SizeClose 1If Bold = True Then  txtEdit.FontBold = TrueElse: txtEdit.FontBold = FalseEnd IfIf Italic = True Then  txtEdit.FontItalic = TrueElse: txtEdit.FontItalic = FalseEnd IfIf Underline = True Then  txtEdit.FontUnderline = TrueElse: txtEdit.FontUnderline = FalseEnd IfIf Size = 1 Then  txtEdit.FontSize = 8ElseIf Size = 2 Then  txtEdit.FontSize = 12Else  txtEdit.FontSize = 18End IfExit SubNo_Open:Resume ExitLineExitLine:Exit SubEnd Sub Private Sub mnuFileSave_Click()cdlFiles.Filter = "Files (*.ned)|*.ned"cdlFiles.DefaultExt = "ned"cdlFiles.DialogTitle = "Save File"cdlFiles.Flags = cdlOFNOverwritePrompt + cdlOFNPathMustExistOn Error GoTo No_SavecdlFiles.ShowSaveOpen cdlFiles.FileName For Output As #1Print #1, txtEdit.TextClose 1Exit SubOpen cdlFiles.FileName For Output As #2Write #2, Bold, Italic, Underline, SizeClose 2No_Save:Resume ExitLineExitLine:Exit SubEnd Sub Private Sub mnuFmtBold_Click()'Toggle bold font statusBold = Not (Bold)mnuFmtBold.Checked = Not (mnuFmtBold.Checked)txtEdit.FontBold = Not (txtEdit.FontBold)End Sub Private Sub mnuFmtItalic_Click()'Toggle italic font statusItalic = Not (Italic)mnuFmtItalic.Checked = Not (mnuFmtItalic.Checked)txtEdit.FontItalic = Not (txtEdit.FontItalic)End Sub Private Sub mnuFmtSizeLarge_Click()'Set font size to largeSize = 3mnuFmtSizeSmall.Checked = FalsemnuFmtSizeMedium.Checked = FalsemnuFmtSizeLarge.Checked = TruetxtEdit.FontSize = 18End Sub Private Sub mnuFmtSizeMedium_Click()'Set font size to mediumSize = 2mnuFmtSizeSmall.Checked = FalsemnuFmtSizeMedium.Checked = TruemnuFmtSizeLarge.Checked = FalsetxtEdit.FontSize = 12End Sub Private Sub mnuFmtSizeSmall_Click()'Set font size to smallSize = 1mnuFmtSizeSmall.Checked = TruemnuFmtSizeMedium.Checked = FalsemnuFmtSizeLarge.Checked = FalsetxtEdit.FontSize = 8End Sub Private Sub mnuFmtUnderline_Click()'Toggle underline font statusUnderline = Not (Underline)mnuFmtUnderline.Checked = Not (mnuFmtUnderline.Checked)txtEdit.FontUnderline = Not (txtEdit.FontUnderline)End Sub

Command Button Images www.xtremevbtalk.com

Anybody know of a good site to get some command button images from?You know... like bold, italic, underline, etc etc

Aligning Text + More www.codeguru.com

how do I align text within a textbox during run time? To the left, center, and right....with only selected text (.seltext)?Also, how can I change the font to bold, italic, strikethru, and underline, by toggling? I tried this:text1.fontbold = not fontboldbut it turns the font to bold, but doesn't make it not bold... How can I make it so that selected text will become bold, underline, strikethru, italic, and if there is no selected text, any text typed after that is that kind?

HTC Desire :: Note Application With Different Style Fonts - Colours androidforums.com

I am looking for a note app which has different style fonts, different colours, bold, italic and underline text.

Formatting Toolbar For A Textarea ? stackoverflow.com

I have been working on a formatting toolbar for a textarea, much like the toolbar for writing questions on this very site (with the bold, italic, underline buttons). The only difference is that I need the buttons to make the text actually bold not just add a bold tag. What I need is similar to the [url] rich comment editor, or the [url]comment editor, or google docs. how I can make some text in a textarea show up bold, italic, or underlined but keep the rest of it?

Toolbars www.vbforums.com

Can anyone tell me how to create toolbars in visual basic, i want to make a Bold , Italic and Underline button on a text editing program i am working on.Thanks,Mungo

Copying From A Rich Text Box www.vbforums.com

How do I copy the contents of a RichTextBox to anotherRichTextBox including the properties of each text/strings(Font, Bold/Italic/Underline, Color)?- I'm using VB 6.0 Enterprise Edition

Advertisement

Four Font Style Codes www.xtremevbtalk.com

I am making a quick word processor, with the basics (alignment, cut, copy, paste, font size, font style etc.)I have four buttons for each of the font styles; Bold, Italic, Underline, and Strikeout.I have entered the following code, but my problem is, only one of the styles is used at a time, so if I use bold, then press italic, bold will be removed and italic will take its place. I want all four of the styles to be able to be used at once. [code]

Wireless Keyboard Shortcuts discussions.apple.com

I have the latest wireless bluetooth keyboard and I synced it to my iPad. On the pages app, the keyboard shortcuts for copy and paste work, but the keyboard shortcuts for bold, italics, underline, superscript, subscript do not work. Has anyone figured out how to use these shortcuts with the wireless keyboard? I believe it's command b, I, u for bold, italics, and underline, and command-control plus sign, minus sign for superscript and subscript, but I can't get it to work?

Underline The Text? forums.adobe.com

How to underline the text using Adobe Photoshop Type Tool? I only seem to see Regular, Italic, Bold + Bold Italic? Where's the Underline function? 

MAke This Shorter? www.vbforums.com

any way to make this code shorter?VB Code:Option ExplicitDim Bold As BooleanDim Italic As BooleanDim Underline As BooleanDim Size As IntegerDim Text As String Private Sub Form_Load()Bold = FalseUnderline = FalseItalic = FalseSize = 1End Sub Private Sub mnuFileExit_Click()'Make sure user really wants to exitDim Response As IntegerResponse = MsgBox("Are you sure you want to exit the note editor?", vbYesNo + vbCritical + vbDefaultButton2, "Exit Editor")If Response = vbNo Then  Exit SubElse  EndEnd IfEnd Sub Private Sub mnuFileNew_Click()'If user wants new file, clear out textDim Response As IntegerBold = FalseUnderline = FalseItalic = FalseSize = 1Response = MsgBox("Are you sure you want to start a new file?", vbYesNo + vbQuestion, "New File")If Response = vbYes Then txtEdit.Text = ""End Sub Private Sub mnuFileOpen_Click()cdlFiles.Filter = "Files (*.ned)|*.ned"cdlFiles.DefaultExt = "ned"cdlFiles.DialogTitle = "Open File"cdlFiles.Flags = cdlOFNFileMustExist + cdlOFNPathMustExistOn Error GoTo No_OpencdlFiles.ShowOpen Open cdlFiles.FileName For Input As #1Input #1, Bold, Italic, Underline, SizeInput #1, Text 'I also added a form public variable Text to match with how you had the other things laid outClose 1txtEdit.Text = Text If Bold = True Then  txtEdit.FontBold = True  mnuFmtBold.Checked = TrueElse: txtEdit.FontBold = False  mnuFmtBold.Checked = FalseEnd IfIf Italic = True Then  txtEdit.FontItalic = True  mnuFmtItalic.Checked = TrueElse: txtEdit.FontItalic = False  mnuFmtItalic.Checked = TrueEnd IfIf Underline = True Then  txtEdit.FontUnderline = True  mnuFmtUnderline.Checked = TrueElse: txtEdit.FontUnderline = False  mnuFmtUnderline.Checked = TrueEnd IfIf Size = 1 Then  txtEdit.FontSize = 8  mnuFmtSizeSmall.Checked = True  mnuFmtSizeMedium.Checked = False  mnuFmtSizeLarge.Checked = FalseElseIf Size = 2 Then  txtEdit.FontSize = 12  mnuFmtSizeMedium.Checked = True  mnuFmtSizeLarge.Checked = False  mnuFmtSizeSmall.Checked = FalseElse  txtEdit.FontSize = 18  mnuFmtSizeLarge.Checked = True  mnuFmtSizeMedium.Checked = False  mnuFmtSizeSmall.Checked = FalseEnd IfExit SubNo_Open:Resume ExitLineExitLine:Exit SubEnd Sub Private Sub mnuFileSave_Click()cdlFiles.Filter = "Files (*.ned)|*.ned"cdlFiles.DefaultExt = "ned"cdlFiles.DialogTitle = "Save File"cdlFiles.Flags = cdlOFNOverwritePrompt + cdlOFNPathMustExistOn Error GoTo No_SavecdlFiles.ShowSave Open cdlFiles.FileName For Output As #1Write #1, Bold, Italic, Underline, SizeWrite #1, txtEdit.TextClose 1  Exit SubNo_Save:Resume ExitLineExitLine:Exit SubEnd Sub Private Sub mnuFmtBold_Click()'Toggle bold font statusBold = Not (Bold)mnuFmtBold.Checked = Not (mnuFmtBold.Checked)txtEdit.FontBold = Not (txtEdit.FontBold)End Sub Private Sub mnuFmtItalic_Click()'Toggle italic font statusItalic = Not (Italic)mnuFmtItalic.Checked = Not (mnuFmtItalic.Checked)txtEdit.FontItalic = Not (txtEdit.FontItalic)End Sub Private Sub mnuFmtSizeLarge_Click()'Set font size to largeSize = 3mnuFmtSizeSmall.Checked = FalsemnuFmtSizeMedium.Checked = FalsemnuFmtSizeLarge.Checked = TruetxtEdit.FontSize = 18End Sub Private Sub mnuFmtSizeMedium_Click()'Set font size to mediumSize = 2mnuFmtSizeSmall.Checked = FalsemnuFmtSizeMedium.Checked = TruemnuFmtSizeLarge.Checked = FalsetxtEdit.FontSize = 12End Sub Private Sub mnuFmtSizeSmall_Click()'Set font size to smallSize = 1mnuFmtSizeSmall.Checked = TruemnuFmtSizeMedium.Checked = FalsemnuFmtSizeLarge.Checked = FalsetxtEdit.FontSize = 8End Sub Private Sub mnuFmtUnderline_Click()'Toggle underline font statusUnderline = Not (Underline)mnuFmtUnderline.Checked = Not (mnuFmtUnderline.Checked)txtEdit.FontUnderline = Not (txtEdit.FontUnderline)End Sub WITHOUT using RichTextBox!thx

Richtextbox's Fontstyle Between Bold/italic/underline www.vbforums.com

I have created a page where I can toggle the richtextbox's fontstyle between bold/italic/underline. This works flawlessly. However, when I assign it more than one font style I do not know how to tell which ones it has through code. For instance if I bold something I can simply check richtextbox.SelectionFont.Bold but what about if it is bold and italic?

Updating Div With Text From Ckeditor / Getting Styles To Work www.sitepoint.com

I have a textarea which uses ckeditor to make it a wysiwyg. I also have a bit of JS which watches the ckeditor and when a user types into it, whatever they type appears in a div elsewhere on the page.My ckeditor allows the text to be bold, italic, underlined and resized. When I apply styles to the text in the ckeditor textarea, I want them to reflected in the div which updates. At the moment only underline and resizing the text works. Choosing bold or italic does nothing the text updates ok, but no bold or italic. I've been told: "Ckeditor is using strong for bold, em for italics. My guess is that the browser or framework you are using doesn't apply bold and italics styles to those tags. You'll have to do that yourself." I've tested on several browsers, I checked in FF Opera Safari Chrome IE8 & IE9 and its the same in all them. Underline works, resize works but neither bold or italic do. (Interestingly in IE7 bold and italic do work as well as the size and underline! What's going on with that?!?) So I assume it is the framework? Can anyone tell me if this is right and if so, how do I go about doing that myself?

Updating Div With Text From Ckeditor - Getting Styles To Work? www.webdeveloper.com

I have a textarea which uses ckeditor to make it a wysiwyg. I also have a bit of JS which watches the ckeditor and when a user types into it, whatever they type appears in a div elsewhere on the page.My ckeditor allows the text to be bold, italic, underlined and resized. When I apply styles to the text in the ckeditor textarea, I want them to reflected in the div which updates. At the moment only underline and resizing the text works. Choosing bold or italic does nothing the text updates ok, but no bold or italic. I've been told: "Ckeditor is using strong for bold, em for italics. My guess is that the browser or framework you are using doesn't apply bold and italics styles to those tags.ou'll have to do that yourself."I've tested on several browsers, I checked in FF Opera Safari Chrome IE8 & IE9 and its the same in all them. Underline works, resize works but neither bold or italic do. (Interestingly in IE7 bold and italic do work as well as the size and underline! What's going on with that?!?)So I assume it is the framework? Can anyone tell me if this is right and if so, how do I go about doing that myself?heres the JS I'm using to update the div: Code:<label for="editor1">Background Story</label><textarea id="editor1" name="editor1">This is sample text

Updating Div With Text From Ckeditor - Getting Styles To Work www.codingforums.com

I have a textarea which uses ckeditor to make it a wysiwyg. I also have a bit of JS which watches the ckeditor and when a user types into it, whatever they type appears in a div elsewhere on the page. My ckeditor allows the text to be bold, italic, underlined and resized. When I apply styles to the text in the ckeditor textarea, I want them to reflected in the div which updates. At the moment only underline and resizing the text works. Choosing bold or italic does nothing :( the text updates ok, but no bold or italic. I've been told: "Ckeditor is using strong for bold, em for italics. My guess is that the browser or framework you are using doesn't apply bold and italics styles to those tags. You'll have to do that yourself." I've tested on several browsers, I checked in FF Opera Safari Chrome IE8 & IE9 and its the same in all them. Underline works, resize works but neither bold or italic do. (Interestingly in IE7 bold and italic do work as well as the size and underline! heres the JS I'm using to update the div:<label for="editor1">Background Story</label><textarea id="editor1" name="editor1">This is sample text

"Object Reference Not Set To An Instance Of An Object" When Selecting Text On Richtextbox social.msdn.microsoft.com

I have been getting some nullexceptions on the following lines of code...: [Code]... Its a text editor that i am working on. When a text is bolded and i have selected it, the button for bolding text becomes checked and same goes to the other ones like italic,underline and strikeout. but if I have selected a text with bold and italics and multiple ones, it gives me a "Object reference not set to an instance of an object." How could i solve this?

"new Font" Properties Cancel Previous Font Property www.vbcity.com

Hi , I am a super newbie with an issue.I hope I explain this well enough to make sense.I have a form with multiple check boxes that adjust font properties. I have a bold chkbx, an italic chkbx and an underline chkbx. I have coded them individially to change the font property in a rich text box using "new font =" with the "_click" sub. They all work properly by themselves, but if another chkbx is selected, the new chkbx font cancels the old font.What I want to happen is for the font properties to accumulate, meaning that I want bold and italic and underline to all be displayed when all three chkboxes are checked.I can't seem to figure out how to put multiple FontStyles.(bold,italic,underline) in a single command.thanks for bearing with me and any advice would be appreciatedZeke

Adjusting Font Style For A RichTextBox? stackoverflow.com

I'm having trouble adjusting the font style in a RichTextBox and I've seen a few different approaches that talk about single attributes (like toggling bold on and off)... but I'm trying to make it so that my font class can adjust any attribute (bold, italic, underline). I realize that Font.Style is a set of Boolean flags (a bitfield?)... but I'm not sure how to handle the attributes all at once. Here is the troublesome code: Public Sub ModifyFontStyle(Optional ByVal Plain As Object = Nothing, Optional ByVal Bold As Object = Nothing, _ Optional ByVal Italics As Object = Nothing, Optional ByVal Underlined As Object = Nothing) [Code].... What is happening to the font? The text should be underlined and in italics not strikethrough... Is this a logic error or a simple misunderstanding on my part?

Set Treeview Node Italic Or Underlined www.xtremevbtalk.com

Hi,I am working with a treeview, and I need to set the text of certain nodes underlined and certain italic.. how do I do that? There is only a Bold-property for the nodes, no Italic or Underlined one.Thank you!OsMo

Bold, Underline, Italics www.vbforums.com

Where might I find an example of how I can use the BOLD, ITALIC, and UNDERLINE, methods for text inside a text box?Also is a text box the best way to go with using bod, italics, and underlines?

Adding HTML Tags From VB 6.0 visualbasic.ittoolbox.com

Hello,I am looking for a code that would help me to add HTML tags (Bold,Italics, Underline, Paragraph marks) to a word document. Actually i am trying to get the hidden codes present in the word document to identify the above said properties. Any help would reg this would be thankful.I can say that u can also refer to crosseyes,it identifies the bold, italics present in the word document. I need a code that would add a prefix/sufix the properties of the word documents. R. Suresh

Code Font Style,Size In .NET Program? www.dreamincode.net

I am creating Notepad in VB.NET and i added a menu strip which contain FONT>Bold,Italic,Bold Italic,Regular,Underline and Font Size> 8pt, 10pt. But i dont know which command can do this .So please tell me about related commands.

Display Text Which Were Read From .xml Database As Color, Italic, Bold, Etc In Richtextbox? www.dreamincode.net

I need to display my text which were read from .xml database as color, italic, bold, etc. in richtextbox, how do i make a code to do that,The reading and displaying is fine, but when certain word like again is read it should display in italic, and whenever a word like over is read it should be display in bold or underline etc.I use vb.net 2003 and .xml for the database.

ActionScript 2.0 :: HTML Text Tags (Bold / Italics) Does Not Work www.kirupa.com

I'm using HTML text formatting with a Textfield. At the moment the <u> underline tag works fine but the <b> bold tags don't work or the italics tag doesn't work either. I read somewhere that a font with bold and italics needs to be "available". I'm just using a textfield with Arial as the font - which is embedded.

Convert Span Tags In A String? bytes.com

I need of assistance to convert spans having style related bold, ital and underline & color into html bold, underline and/or italicize tags. Sample Input String: <p>In�<span�style="font-family:'serif',�'Caslon';�font-size:11pt;�font-style:italic;�color:#221E1F">The�Crack�in�the�Cosmic�Egg</span>�I�recounted how,�at�a�gathering�of�dor�mitory�mates�around�a�table,�<span�style="font-family:'serif',�'Caslon';�font-size:11pt;�font- [Code].... how,�at�gathering�of�dor�mitory�mates�around�a�table,�<i>I�demonstrated�that�fire�didn�t�have�to�burn�me</i>.�We�all�smoked back�then�&�I�used�up�full�pack�of�Pall�Mall�<b>cigarettes</b>�(long�unfiltered�furnaces)�t demonstrat my�assertion </p>

R/Textbox - Indent - Any Suggestions? www.vbforums.com

Hi,I am working on a project that involves a richtextbox.I am currently setting up shortcut keys to activate the bold, italic and underline typefaces. I know how to do, and have succeeded with ctrl-u and ctrl-b, but with ctrl-i, it not only selects Italic, it also inserts a tab. I guess this is a default shortcut key in the rtb.Can anyone tell me how to disable this? I suppose one way would be to assimilate a backspace press, after the italics have been set, but this is not ideal.Many Thanks

Android :: Edit Text To Support The Properties Of Bold Italic And Underline stackoverflow.com

I am working with an edit text to support the properties of bold,italic and underline.I got succeed after selecting the text and clicking on bold my text was bold.Now what my requirement is how to remove the bold again after selecting the text and clicking on bold button.

Formatting Text (Bold, Italic, Underline) Etc Going Into A RTB social.msdn.microsoft.com

RTB.text (or .rtf) = "Some text" & "some bold text" & TextBoxA.text & BoldTextBoxB.text. How to I make "some bold text" bold and the text in "BoldTextBoxB" bold when it goes into my RTB? I need bold, italic, and underline, but would prefer a general solution.

Flash :: Handling Underline In New Text Engine? www.kirupa.com

I am trying to something very simple but I can't find an option to do that. I have a button that updates the ElementFormat, it can take care of bold and italic but the problem is underline. I can't find an option to set it as "underlined" or "not underlined".

ActionScript 3.0 :: Handling Underline In New Flash Text Engine? www.actionscript.org

I am trying to something very simple but I can't find an option to do that. I have a button that updates the ElementFormat, it can take care of bold and italic but the problem is underline. I can't find an option to set it as "underlined" or "not underlined".

Webbrowser Control Font Control www.xtremevbtalk.com

Hi,I have a basic HTML editor for a customer, controlling font size, fonts, bold, italics etc.. are implemented and are pretty easy to use. i.e. I have a toolbar with various buttons "B" "I" "U" for example, to toggle bold, italics and underline amongst others.However, how could I detect that, when a user clicks on a word within the document, that it is bold/italic or underline font properties so that I can then push some events to my buttons to press/depress depending on the style of text that they have clicked on. ?Thanks for ANY help! Carl

Convert Rtf Tag To Html Tag forums.codeguru.com

using vb.net, i have a richtextbox in my application. i would like to have the emphasis to have an html tags.for example /b this is a test /b0 would be <bold>this is a test</bold> and it's simple, but the most difficult part for me is when the words have 2 emphasis /b/i this is a test /b0 /i0 the output becomes <bold><italic>this is a test</bold></italic> this will have an error in parsing. then output should be <bold><italic>this is a test</italic></bold>.

RichTextBox Selection Font (Applying 2 Styles) www.vbdotnetforums.com

How do I apply 2 font styles to the text selected in a richtextbox? Used this method to change fontstyle: RichTextBox1.SelectionFont = New Font(RichTextBox1.SelectionFont, FontStyle.Bold) But with this method I can only apply 1 font-style (for example bold OR italic OR underlined, etc.) right? But I want to apply for example 2 front-styles, or just add the font style ( so I can add several front-styles to the selected text, for example the text is bold, and then ALSO make it underlined (with this method I can only change the font-style, only one font-style)), how do I do this? Just do so: RichTextBox1.SelectionFont = New Font(RichTextBox1.SelectionFont, FontStyle.Bold + FontStyle.Italic)

Phplib Creating Pdf Documents forums.devshed.com

I can load a font, set a font, load an image, draw a line, output text in a box, output text on a line, create a pdf, open a pdf, add a page, close a page, close a pdf but I can not set a font to bold or italic or underlined. I currently use a function which moves the text position slightly and re outputs it for bold and I simply draw line for underlined text but now I need to do italicized and I am stuck. I found little on font styles anywhere when using the pdf commands on php.net I can see the list of commands but everything is deprecated and the new commands don't have clear documentation on how to use them: pdf_setfont($pdf, $times, 9); pdf_setcolor($pdf,"both","rgb",0,0,0); pdf_set_parameter($pdf,"fontstyle","italic"); the first line sets the font to be times roman and size 9 the second change the color to black I though the last line would set the font to be italic but it is not correct Any ideas?

User To Be Able To Highlight Text And Apply An Attribute? bytes.com

So - I have some text in an RTF control. I want the user to be able to highlight text and apply an attribute. The following code is placed into a button called BOLD and seems to work nicely: If rtfText.SelectedText.Length > 0 Then rtfText.SelectionFont = New Font(rtfText.SelectionFont, FontStyle.Bold) End If The code above will turn the selected text bold. But then the user selects the Same text and with the following code placed into a button called ITALIC it removes the bold attribute and replaces it with italics. If rtfText.SelectedText.Length > 0 Then rtfText.SelectionFont = New Font(rtfText.SelectionFont, FontStyle.Italic) End If Since the users actions are separate - I can not know that they want BOLD and ITALIC, so how do I make sure I keep the existing attribute on the selected text (which, by the way could be part bold and part not-bold) and add italic? Somehow I need to add the italic attribute to the selected text, not simply replace all attributes with italic.

Actionscript 3 :: Textformat, Embedfonts And Multiple Fonts? stackoverflow.com

Here is my issue : I have a dynamic html text field, to which i passed html text / textformat such as : <P ALIGN="LEFT"><FONT FACE="Trebuchet MS" SIZE="14" COLOR="#000000" LETTERSPACING="0" KERNING="0">Some text<B>some bold text</B><I><U>and some italic underline</U></I></FONT></P>My problem is, i can't use embedfonts because if i do, and use Trebuchet MS for instance, the bold tag will never render as in flash you have to select if the font your embed is bold or not. I'm trying to avoid to convert the whole htmltext/textformat thing to a CSS one..

Web Forms :: Want To Set Font Format In Textbox? forums.asp.net

i want to set format for text like bold ,Italic or underline same as here on toolbar given i wan to do for text box and wanan save same one in database and get data from Db how i can do i dont want to use rich text box becoz i have alerady text box and dont want freetextbox.dll and i found by using this when i use italic i can not save in Database got error like db truncate error

Bold, Italics, Underline Str_replac'd Using The Same Char For Opening And Closing Tags bytes.com

I want to write a _very_ simple text parser that would replace a string like: "This is text with /italics/, *bold* and _underline_." and generate automatically something like this: "This is text with <i>italics</i>, <b>bold</b> and <span class="underline">underline</span>." I've found a lot of code snippets explaining how to do BBCode, but BBCode has different opening and closing pseudo-tags. In my example, the opening and closing tags are the same (either /, * or _). So I need something slightly more intelligent that would count the number of /, * or _ tags, see if that number is even or odd and decide accordingly if it must replace the char with an opening or closing tag. (I hope my wording makes sense. It's very clear in my head :-D) How would you implement that? I reckon it can't be hard, but I just can't figure how to do it right now!

How To Add Text To RTF Textbox At Runtime? www.vbforums.com

How do I add a series of data to a RTFtextbox at runtime?e.g. of what I wantName Address Age Salary 13/03/2002John Creek hill 25 30,000Mary Valley West 39 35,000 Total ===> 65,000___________________________________________Example of how I am trying to code itrtb1.Font.Bold = Truertb1.Font.Underline = True rtb1.Text = "Name " & vbTab & "Addrress " & vbTab & "Age" & vbTab & " Salaryrtb1.Font.Bold = Falsertb1.Font.Underline = Falsertb1.Font.Italic = Truertb1.text = Date()rtb1.Font.Italic = FalseFor i = LBound(myArray) to UBound(myArray) rtb1.Text = name(myArray) & vbTab & address(myArray) ........next i________________________________________________I know when I do rtb1.Font.Underline = False I am setting this attribute False for the whole textbox, but how do I vary it.Note:My array is populated with data read for a file. The size of this file will vary but will generally be in excess of 2000 lines.Hope someone can help.

Setting Up Font www.xtremevbtalk.com

I want user to be able to change the font type, size, bold, italic and color but not show the underline and strikethough. Is there a way to to this.right now if I use the flat &h100 i see the underline and strikethrough

Fill Richtextbox Using Code www.vbforums.com

I want to add text to a richtextbox using code. Some of this text must be formatted.The problem is that when I give a command to do so, all the text in the richtextbox is formatted according to the last command.I tried several things, for instance:End result of Command1: everything turns bold and italic.Private Sub Command1_Click() With RichTextBox1 .Text = "Normal Text" & vbCrLf .SelBold = True .Text = .Text & "Bold Text" & vbCrLf .SelItalic = True .Text = .Text & "Italic and bold text" & vbCrLf End WithEnd SubIn Command2 the text ‘Bold text’ first turns bold. The text ‘Italic and bold text’ is italic but not bold and the text ‘Bold text’ turns normal again.Private Sub Command2_Click()Dim strText As String With RichTextBox1 .Text = "Normal Text" & vbCrLf strText = "Bold Text" & vbCrLf .Text = .Text & strText .SelStart = Len(.Text) - Len(strText) .SelLength = Len(strText) .SelBold = True strText = "Italic and bold text" & vbCrLf .Text = .Text & strText .SelStart = Len(.Text) - Len(strText) .SelLength = Len(strText) .SelItalic = True End WithEnd Sub

ActiveX Font Property www.vbcity.com

      Hi! I'm new with activeX programming using VB. I want to make a user control with font property. So far I was able to make them available but eventually I cannot make the other features such as bold, itlalic... and size to work. Below is the program that I've done. Please advise me of any mistake or missing with my code. Thank you very much.Private WithEvents mFont As StdFontPrivate Sub mFont_FontChanged(ByVal PropertyName As String)    Set UserControl.Font = mFont    RefreshEnd SubPrivate Sub UserControl_Initialize()    Set mFont = New StdFont    Set UserControl.Font = mFontEnd SubPublic Property Get Font() As StdFont    Set Font = mFontEnd PropertyPublic Property Set Font(mNewFont As StdFont)   With mFont      .Bold = mNewFont.Bold      .Charset = mNewFont.Charset      .Italic = mNewFont.Italic      .Name = mNewFont.Name      .Size = mNewFont.Size      .Strikethrough = mNewFont.Strikethrough      .Underline = mNewFont.Underline      .Weight = mNewFont.Weight   End With      PropertyChanged "Font"End PropertyPrivate Sub UserControl_ReadProperties(PropBag As PropertyBag)    Font = PropBag.ReadProperty("Font", StdFont)End SubPrivate Sub UserControl_WriteProperties(PropBag As PropertyBag)    PropBag.WriteProperty "Font", Font, StdFontEnd Sub

Forms Data Controls :: Create Drop Down List From Datagrid forums.asp.net

How would I re-code the datagrid below so it displays as a drop down list? The data I want to display in the drop down list is ID="dgvFitters".Also, is it possible to display the data in a datagrid and in a drop down list simultaneously? <asp:DataGrid runat="server" ID="dgvFitters" AutoGenerateColumns="False" CssClass="defaultTable" Font-Bold="False" ForeColor="Blue" OnItemDataBound="dgvFitters_ItemDataBound" BorderStyle="None" BorderWidth="0px" CellPadding="10" GridLines="None"> <AlternatingItemStyle BackColor="#CCDBEE" BorderStyle="None" BorderWidth="10px" /> <ItemStyle BackColor="#eeeeee" BorderStyle="None" BorderWidth="10px" /> <Columns> <asp:BoundColumn DataField="ShortName" HeaderText="Dealer"> <ItemStyle Font-Bold="True" Font-Italic="False" Font-Overline="False" Font-Strikeout="False" Font-Underline="False" ForeColor="#0054a4" Font-Names="arial" Font-Size="12px" /> </asp:BoundColumn> <asp:BoundColumn DataField="FullAddress" HeaderText="Address"> <ItemStyle Font-Bold="False" Font-Italic="False" Font-Overline="False" Font-Strikeout="False" Font-Underline="False" ForeColor="#0054a4" /> </asp:BoundColumn> <asp:BoundColumn DataField="DistanceSquared" HeaderText="Distance (miles)"></asp:BoundColumn> <asp:TemplateColumn> <ItemTemplate> <asp:ImageButton ID="btnSelect" CommandName="select" runat="server" ImageUrl="~/graphics/step3_button.png" ToolTip="Go to 'Step 3 - Choose your tyres'" OnCommand="btnSelect_Command" OnClientClick="jsEnabled();" /> </ItemTemplate> </asp:TemplateColumn> </Columns> <HeaderStyle ForeColor="#ef3e42" BackColor="#ffffff" CssClass="resultsHeader" Height="10px"/> </asp:DataGrid>

Web Forms :: Creating Drop Down List From DataGrid forums.asp.net

is there a way of creating a drop down list from the datagrid code below i.e. draw the data from ID="dgvfitters" to create a drop down, which is generated from the database? What would I need to do with the code and how would I implement it? The code is as follows: <asp:DataGrid runat="server" ID="dgvFitters" AutoGenerateColumns="False" CssClass="defaultTable" Font-Bold="False" ForeColor="Blue" OnItemDataBound="dgvFitters_ItemDataBound" BorderStyle="None" BorderWidth="0px" CellPadding="10" GridLines="None"> <AlternatingItemStyle BackColor="#CCDBEE" BorderStyle="None" BorderWidth="10px" /> <ItemStyle BackColor="#eeeeee" BorderStyle="None" BorderWidth="10px" /> <Columns> <asp:BoundColumn DataField="ShortName" HeaderText="Dealer"> <ItemStyle Font-Bold="True" Font-Italic="False" Font-Overline="False" Font-Strikeout="False" Font-Underline="False" ForeColor="#0054a4" Font-Names="arial" Font-Size="12px" /> </asp:BoundColumn> <asp:BoundColumn DataField="FullAddress" HeaderText="Address"> <ItemStyle Font-Bold="False" Font-Italic="False" Font-Overline="False" Font-Strikeout="False" Font-Underline="False" ForeColor="#0054a4" /> </asp:BoundColumn> <asp:BoundColumn DataField="DistanceSquared" HeaderText="Distance (miles)"></asp:BoundColumn> <asp:TemplateColumn> <ItemTemplate> <asp:ImageButton ID="btnSelect" CommandName="select" runat="server" ImageUrl="~/graphics/step3_button.png" ToolTip="Go to 'Step 3 - Choose your tyres'" OnCommand="btnSelect_Command" OnClientClick="jsEnabled();" /> </ItemTemplate> </asp:TemplateColumn> </Columns> <HeaderStyle ForeColor="#ef3e42" BackColor="#ffffff" CssClass="resultsHeader" Height="10px"/> </asp:DataGrid>

Turning Text Bold PLEASE HELP!! www.codeguru.com

i need to know how to...when you have a text box and while the programs running you can type in the text box. then when you check a box the program turns the text that was typed into bold. thats all i need to know. how to make that text bold when you check on a box. i can figure out the italics and underline from that right? and how to turn it off when the buttons unchecked. that should be easy. but i cant figure out how to turn the text bold (or italic or underlined). please help me!!

RichText And Disabling Text Style social.msdn.microsoft.com

I know how to enable the selected text style (bold, italic, underline...), maintaining other styles. For example, If I want to enable 'bold,' the following line of code works. [Code] I can also remove all text styles. I also know how to find out whether or not the selected segment of text has a style. But how do I remove the selected style without removing others? How do I disable only 'bold' while the selected segment of text has other styles like 'italic' and 'underline'?

How To Turn On And Off BOLD And UNDERLINE www.vbforums.com

Hi,I am trying to print a line with UNDERLINE and BOLD on but keep getting "Invalid use of property" error. Can someone please guide me how to turn the UNDERLINE and BOLD on and then after printing the line, how to turn them OFF so the rest of the text gets printed without the bold and underline.Thanks a lot for all your help.VB Code:Printer.FontName = "Courier New"   Printer.FontSize = 10   'Printer.Font.Underline   'Printer.Font.Bold   Printer.CurrentX = 600   Printer.CurrentY = PageStart + 6 * 400 'y pos   Printer.Print Strg1

Css :: Adobe Flex An Embedded Version Of A Font? stackoverflow.com

Scenario: Flex application utilizing an @font-face declaration for embedding the font. (Embedded fonts are required to be able to rotate text.) The application was originally developed as an English application, but during localization it became necessary to locate a unicode font capable of displaying Asian characters. The original implementation of the application uses four fonts to satisfy the various permutations of character emphasis. Bold, Bold Italic, Italic and Normal are all supplied through the corresponding Arial fonts in the Arial family. Problem: When trying to compile in the font as one that could be used for the bold, italic, and bold italic through something like (yes its not ideal, this was just a test to see if it could be done): [Code]... It isn't so much the how to solve this issue. There are plenty of viable solutions. However what I would really like to know is how does Flex apply bold and italics to a font that it says does not support bold or italics.

Applying Font Properties Between Two Rich Text Boxes www.vbforums.com

i am creating a messenger setup. i was told that if i just apply the text from one text box with bold, italic, underline, or strikthru that it would transfer to the next box. but it does not. how do i transfer the bold properties to another text box. thancks

A Very Easy Hard Question ! (seltext) www.vbforums.com

Code:text1.fontboldtext1.fontitalictext1.fontunderlineNo problems, the above I can do to make all the text in a box bold, italic, underline etc. If I wanted just the selected highlighted text to be bold if I click a commandbutton, I think I have to use the seltext option, so I have been trying :Code:text1.seltext.fontboldwhich does not work, all I have left to put here then is HHHHEEEEELLLLPPPPPP!!!!!! (please, alright then, pretty please).

Treeview Node Font Properties www.vbcity.com

Hello,I'm new here, bear with me I have a Treeview and I can change the Node's font color and bold properties, but cannot find the "italics" or "underline" or "font face" properties. I can't imagine that VB would have bold and forecolor, but not the rest. Seems a little incomplete. Does anyone know how I can change these properties somehow? Any guidance would be appreciated.Thanks

Draw Image With Bold/italic Text? www.daniweb.com

I need to draw image having text using gd library on basis of font selection. User has an option to make text bold/italic. I am using imagettftext to write text on the image. how can we draw having bold/italic text or is there a way to detect whether selected font supports bold/italic feature.

IDE :: Loading Contents From Text File - Bold / Italics Not Displaying www.kirupa.com

I'm loading content from a text file into a text field in Flash. In that text file I have some simple html tags like <b>, <i>, and <img>. I'm setting the textfield as html text: myTextField.htmlText = myContent The img tags work fine, but for some reason the bold and italics are not displaying...the tags are being correctly stripped from the text, but there is no bold or italic text. I'm embedding all the characters I need, but do I need to somehow embed the bold/italics versions of those characters?

AJAX :: How To Customize The Html Editor forums.asp.net

how do i customize the html editor i wrote the code below Protected Overrides Sub FillTopToolbar() TopToolbar.Buttons.Add(New AjaxControlToolkit.HTMLEditor.ToolbarButton.Bold()) TopToolbar.Buttons.Add(New AjaxControlToolkit.HTMLEditor.ToolbarButton.Italic()) TopToolbar.Buttons.Add(New AjaxControlToolkit.HTMLEditor.ToolbarButton.Underline()) TopToolbar.Buttons.Add(New AjaxControlToolkit.HTMLEditor.ToolbarButton.JustifyLeft()) TopToolbar.Buttons.Add(New AjaxControlToolkit.HTMLEditor.ToolbarButton.JustifyRight()) TopToolbar.Buttons.Add(New AjaxControlToolkit.HTMLEditor.ToolbarButton.JustifyCenter()) TopToolbar.Buttons.Add(New AjaxControlToolkit.HTMLEditor.ToolbarButton.OrderedList()) TopToolbar.Buttons.Add(New AjaxControlToolkit.HTMLEditor.ToolbarButton.BulletedList()) TopToolbar.Buttons.Add(New AjaxControlToolkit.HTMLEditor.ToolbarButton.InsertLink()) TopToolbar.Buttons.Add(New AjaxControlToolkit.HTMLEditor.ToolbarButton.FontName()) TopToolbar.Buttons.Add(New AjaxControlToolkit.HTMLEditor.ToolbarButton.FontSize()) ''TopToolbar.Buttons.Add(New AjaxControlToolkit.HTMLEditor.ToolbarButton End Sub Protected Overrides Sub FillTopToolbar() TopToolbar.Buttons.Add(New AjaxControlToolkit.HTMLEditor.ToolbarButton.Bold()) TopToolbar.Buttons.Add(New AjaxControlToolkit.HTMLEditor.ToolbarButton.Italic()) TopToolbar.Buttons.Add(New AjaxControlToolkit.HTMLEditor.ToolbarButton.Underline()) TopToolbar.Buttons.Add(New AjaxControlToolkit.HTMLEditor.ToolbarButton.JustifyLeft()) TopToolbar.Buttons.Add(New AjaxControlToolkit.HTMLEditor.ToolbarButton.JustifyRight()) TopToolbar.Buttons.Add(New AjaxControlToolkit.HTMLEditor.ToolbarButton.JustifyCenter()) TopToolbar.Buttons.Add(New AjaxControlToolkit.HTMLEditor.ToolbarButton.OrderedList()) TopToolbar.Buttons.Add(New AjaxControlToolkit.HTMLEditor.ToolbarButton.BulletedList()) TopToolbar.Buttons.Add(New AjaxControlToolkit.HTMLEditor.ToolbarButton.InsertLink()) TopToolbar.Buttons.Add(New AjaxControlToolkit.HTMLEditor.ToolbarButton.FontName()) TopToolbar.Buttons.Add(New AjaxControlToolkit.HTMLEditor.ToolbarButton.FontSize()) ''TopToolbar.Buttons.Add(New AjaxControlToolkit.HTMLEditor.ToolbarButton End Sub The problem with this code is i cannot get the list of fonts and font sizes , how and i also want to remove the bottom tool bar.

Bold, Italic, Underline www.xtremevbtalk.com

I've had a search through the Forum, can't find what I'm after though, so...I have a standard Toolbar on my form with Bold, Italic & Underline buttons.Quite obviously I want to be able to select these and then text from Text1 is sent to RichTextBox1 with this formatting.I want to make the detection of this formatting as a Public Sub though. Code:Public Sub FormatText() 'Do i put Data As String here or "Dim" it within the Sub ?If Toolbar1.(reference to the BOLD button).value = tbrPressed then RichTextBox1.SelBold '= True (not sure of this bit of code)If Toolbar1.(reference to the ITALIC button).value = tbrPressed then RichTextBox1.SelItalic '= True (not sure of this bit of code)If Toolbar1.(reference to the UNDERLINE button).value = tbrPressed then RichTextBox1.SelUnderline '= True (not sure of this bit of code)RichTextBox1.SelText = Data & vbNewLineEnd SubA little push in the right direction is all I ask please

Run Time Error 91 - Object Variable Or With Block Variable Not Set www.xtremevbtalk.com

Hi, when I run my .exe I have this run time error 91 Object variable or with block variable not set ... i'm using a VB6 and this code was inseide in Module, the two function Criar_arquivo and TextoFixo was called inside of command button....==================================module=====================================Global word1 As ObjectFunction Criar_arquivo() As IntegerDim word1 As ObjectSet word1 = GetObject("", "word.application.8")Set word1 = CreateObject("Word.Application.8")word1.Documents.AddEnd FunctionFunction TextoFixo() As IntegerWith word1.Selection <---------------- error .TypeText (Frame1.Caption) .TypeParagraph .HomeKey Unit = wdLine, Extend = wdExtend With word1.Selection.Font .Name = "Times New Roman" .Size = 14 .Bold = True .Italic = False .Underline = wdUnderlineNone .UnderlineColor = wdColorAutomatic .Strikethrough = False .DoubleStrikeThrough = False .Outline = False .Emboss = False .Shadow = False .Hidden = False .SmallCaps = False .AllCaps = True .Color = wdColorAutomatic .Engrave = False .Superscript = False .Subscript = False .Spacing = 0 .Scaling = 100 .Position = 0 .Kerning = 0 .Animation = wdAnimationNone End With End With word1.Visible = TrueWith word1.Selection .TypeText (Text1.Text) .TypeParagraph .HomeKey Unit = wdLine, Extend = wdExtend With word1.Selection.Font .Name = "Times New Roman" .Size = 14 .Bold = True .Italic = False .Underline = wdUnderlineNone .UnderlineColor = wdColorAutomatic .Strikethrough = False .DoubleStrikeThrough = False .Outline = False .Emboss = False .Shadow = False .Hidden = False .SmallCaps = False .AllCaps = False .Color = wdColorAutomatic .Engrave = False .Superscript = False .Subscript = False .Spacing = 0 .Scaling = 100 .Position = 0 .Kerning = 0 .Animation = wdAnimationNone End With End With word1.Visible = TrueEnd Function============================================================================button=====================================Private Sub Command4_Click()If Frame10.Enabled = True ThenCommand4.Enabled = TrueCriar_arquivoTextoFixo.....end subthanksRick

(quick) Help With HTML Parsing ... www.xtremevbtalk.com

Hello to all Forum Members ;I'm working on a project where I need to parse HTML code and load the tag-info into Treeview. For this , I used MSHTML.TLB (Microsoft HTML Object Library).My problem is , I couldn't find anything to parse Bold or Italic or Underline tags. There are many different classes in MSHTML like MSHTML.Img or MSHTML.FormElement and so on ... but nothing satify to get the text in Bold or Italic or Underline.Can anybody please tell me how to parse these elements using MSHTML ? (or any method ??)Waiting for your reply ...

Not All The Page Is Loaded +javascript? www.dreamincode.net

i have controle panel page where I have 2 dives vertically.first div is used to put buttons and 2nd is used to view relevent page inside the 2nd div.I used AJAX to do so and worked it properly. I was designing a blog. so commenting page is loaded in the 2nd div I used rischtext to make it beautiful like here(i.e forum page allow to start topics) get the support of Bold, Italic , Underline. I import the relevant java script from this site But the problem is when i come through the conntralpannel where i used AJAX Bold, Italic , Underline features are not load in the comment page in the div.

(quick) Help Needed With HTML Parsing ... www.vbcity.com

Hello to all Forum Members ;I'm working on a project where I need to parse HTML code and load the tag-info into Treeview. For this , I used MSHTML.TLB (Microsoft HTML Object Library).My problem is , I couldn't find anything to parse Bold or Italic or Underline tags. There are many different classes in MSHTML like MSHTML.Img or MSHTML.FormElement and so on ... but nothing satify to get the text in Bold or Italic or Underline.Can anybody please tell me how to parse these elements using MSHTML ? (or any method ??)Waiting for your reply ...

Textarea Editor Attempt - Bold - Italic And Underline Buttons That Change The Appearance forums.devshed.com

I have a textarea that has a Bold, Italic and Underline buttons that change the appearance of what is in the textarea. If I highlight a word in the textarea and hit the Bold, Italic and Underline buttons it changes the appearance of the word. Everything works great and now I want to add a color button and Link button. The color button should change the word color and the link button should make the word into a link. Both buttons dont do anything. How to make them work? Code:

Fonts Format Conditions.. www.vbforums.com

i have a very small problem..regarding the font formats that are being displayed in a text box..i had a textbox.. and 3 checkboxs.. they are Bold, Underline and italic..so when i write anything in the textbox then try to check any of any (or all) the checkboxs the change will be applied directly.. i was successfull in doing that..the challenge was to make a condition that if any ONE of the three checkbox is applied, that condition wont allow me to apply any of the remaining 2 checkboxs..Ex: if a applied the bold checkbox i wont be able to apply the underline and the italic checkbox..i hope i made it clear to you guys.. any help will be highly appreciated ..

AJAX :: How To Change Entries To Legacy HTML Code forums.asp.net

I have a page which is using the AJAX Control Toolkit HTML Editor. I have it configured with only the Bold, Italics and Underline buttons. Once the user saves the information, it's stored in a database table. No problems. I need to change the resulting code so the HTML code can be correctly interepted by a Crystal Reports report. CR doesn't understand the <span> options being created by the HTML editor. So for example, I need to change the <span style="font-weight: bold">Bold</span> code created by the HTML Editor so it's entered into the database as <b>Bold</b> instead. I can attempt this in the code behind, but I then also need to replace the </span> with a </b>. This causes an issue because if there are multiple options (e.g. bolded word within an underlined line), then the proper tags won't be closed as they should.

IDE :: Dynamic HTML Text + Embedded Fonts? www.kirupa.com

I am trying to create a text box with actionscript, using an embedded font, and populating it with HTML text. It seems I can either use an embedded font, or HTML formatted text, but not both. To illustrate the problem, I have created a little test. 1. Create a font symbol in the library. Export it for actionscript as "_mainFont". 2. Create a dynamic text box on the stage using _mainFont and type some random text in it, including the use of bold and italics. Set the font size and colour to whatever you like. Name the instance "templateText". 3. On the first frame, type in these actions: [Code]... The textbox should display correctly, using the correct font, colour and all the HTML formatting. Unfortunately, I need to create text on the fly. So modify the actionscript to create a new text field instead of using the template text: [Code]... What happens? I get the right font. The < font color > tag works OK, I get the breaks and the underline, but I get no bold and no italics. Finally, let's make some use of the templateText box by using its formatting. Replace the line: var textBoxFormat = new TextFormat(); with var textBoxFormat = _root.templateText.getTextFormat(); Now the text is formatted with the right font, the same colour and size of the templateText box, but I've lost the HTML font colour and underline in addition to the bold and italics.If I take out the Embed Fonts, I get back bold and italics, but loose font colour and underline, as well as the wrong font.

How Do You Print Formatted Text With Printer.Print? www.vbforums.com

How do you print formatted text using Printer.Print?Eg text in colour, underline & bold & stuff

Send An E-mail With Underline , Bold And Color Text In Program? social.msdn.microsoft.com

How to send an e-mail with underline, bold and color Text in visual basic 2010

BOLD And UNDERLINE Concatenated Cells www.mrexcel.com

I need bolding and underlining cells that are "Concatenated". For example, cell format for cell K12 is already bolded and underlined. If I concatenate (C1,K12,D2) I get a result that doesn't carry over the format of those individual cells - particularly K12 which I want BOLDED and UNDERLINED.

Rich Text Edit Control www.codeguru.com

How do you set boldness for certain places, and italics, colors, etc?I want to do this in the following fashion.text = "(BOLD)TESTING BOLD (NORMAL) - (ITALIC)ITALIC TEXT"... etcis there a way to do this in the text?thankx,

Revert (Bold) Underline Back To Normal www.excelforum.com

What I mean by my "bold" underlines: QRG5UUl.png Notice the difference between the bold underline and the normal ones. There is also some weird thing happening where in some cells, when I use the underline feature, it shows as a bold underline, but once I've pressed enter to move on to another cell, the underline reverts back to normal. If I select to edit (F2 or double-clicking) said cell, the underline becomes bold, and vice versa (s3lw.png). All this started happening immediately after I did this (was just experimenting, and I have no idea what this actually does, or if it was the cause of those occurences): Insert > Symbol > Special Characters > No-width optional break. I did that to just one cell though, and now all this weird stuff is happening.

How To Keep The Command Button Pressed? www.vbforums.com

Hi Guys!I really need your help. My form is shown in the attached file. How will a keep the command button for bold, italic and underline pressed once a user clicks on it ones? and back to unpressed when clicked for the second time. or maybe perhaps change the color background of the command button just like in MS Office 2007.Would you help me please? Thank you.Regards,BarberCut

How Do I Get A Button To Stay Down??????????????? www.vbforums.com

Like in word/wordpad for bold,italic,underline etc. I want to click a button and have it stay down (a boolean set) till it is clicked again. So I need it indented.I could write my own control but surely there's a short cut!!!back to sleepzzzzzzzzzzzzzzzzzzzzzz

Web Forms :: Send A HTML Formatted Email? forums.asp.net

I m trying to send an HTML formatted email. When I get the email I can see the links and <br> tags working but the bold, underline and italics aren't. This is what I used Msg.BodyFormat = System.Web.Mail.MailFormat.Html

AJAX :: Ajaxcontroltoolkit Editor In Chrome And IE7.0 But In Chrome It Is Missing Paste Icon forums.asp.net

i used Ajaxcontroltoolkit Editor with particular icons that is Bold,Italic.Underline and paste icons . it is working fine in IE8.0, In chrome it is missing paste icon in IE7.0 the editor itself is not showing up

Bold, Italic And Underline Button Font www.vbforums.com

hey,does anyone know which font do they use for the bold, italic and underline buttons? I have tried lookin through them and trying to find them but i dont have the patiencethanx

Changing Textbox Text Font Type/Size, Bold, Italic, Underline And Color www.codeguru.com

Hi everyone, this is urgent.I have a textbox where user can type in there. When user select (highlight) the text they can change the font, size, Bold, Italic, Underline and/or color. It should work like in MS Word.How do I do this? I have a combo box for Fonts, a combo box for Size, and 4 command buttons for B, I, U, and Color.Please help?Thanks

Richtextbox Font Color Not Changing www.vbforums.com

ok, i cant seem to get the color to change for meRichTextBox1.SelColor = vbBlueall the other stuff worksRichTextBox1.Font.Italic = TrueRichTextBox1.Font.Name = "Comic Sans MS"RichTextBox1.Font.Size = 20 RichTextBox1.Font.Bold = True RichTextBox1.Font.Underline = Truebut the color isnt firing.

Interpret RTF On Server And Echo The Result In HTML Tags? stackoverflow.com

I've been crawling the web for days now and couldn't find exactly what I'm looking forI'd like to build a webpage that is able to interpret an .rtf document on the server and then echo the text in the browser re-using only the bold, italic, underlined tags and bulleted and numbered list tags. Preferably using PHP, but if it's something else, that would be fine (I'd just have learn that language then a bit too, I guess).

Toolbar Buttons www.xtremevbtalk.com

I'm either being really stupid, or the answer is more complex than I originally imagined.I have a toolbar with 3 buttons (Standard Bold, Italic & Underlined)and I have set style = 1 to make them check buttons.I would have thought there is a way to do something similar to...Code:If Toolbar1.Button1.value = 1 thenRichTextBox1.selBold = TrueelseRichTextBox1.selBold = FalseEnd IfObviously I know this doesn`t work, but I just want to know if there is a way to do it like this.Perhaps I need to put something in the Toolbar1_ButtonClick event, I'm not sure.I apologise if any of this doesn't make sense, I need sleep.

Underline - Italic - Bold Text ? www.xtremevbtalk.com

how can i program a text in code, that it will change from a standard text into a underlined - italic - bold text ?i know it's a stupid question ... but i'm lost it in my memory tnx

Underlining And Making The Text Bold And Italic www.vbforums.com

Open "1.txt" for Output as #1Print #1; tab(8);"Classic Visual Basic"Close #1How to underline "Classic Visual Basic" and at the same timemaking it bold ad Italic.like belowClassic Visual BasicRegdsSam F.

Moving The Textbox Cursor To The End Of All Text forums.devshed.com

hello,i'm making am update client for an online journal website. the website supports bbcode, so in the app i've made buttons like Bold, Italic, Underline, etc...so when you click the button it prints either an opening tag or a closing tag . but when you click the button it and set the focus on the textbox again the cursor in the textbox moves to the beginning.Code:Tag$ = "[b]"txtBody.Text = txtBody.Text + Tag$txtBody.SetFocusi know there is a way to keep the cursor at the end of the textbox i just don't know how. could anyone help me out?thanks-Dustin

Function To Add HTML Tags To Text www.phpfreaks.com

i have 4 fields (noun1, noun2, noun3, verb1) for a person to fill out and what they put into these fields will be printed out at certain points throughout a quotation (basically, it's a madlib with quotes from the simpsons and futurama).� after the four fields, i allow them to select from a drop-down select menu with the options of bold, underlined, italics.� what i need done is that IF they select any of those, i need what is printed out from the fields to be printed out with HTML tag formats ().

Font Toolbar www.xtremevbtalk.com

i'm trying to create a font toolbar for my program, but i need a bunch of the icons associated with a toolbar...most specifically bold, italic, underline, left align, right align, and center align. Is there anywhere i can go to find them? Finding icons seems to be the hardest part of programming. Adam

Font.Bold In MsgBox www.xtremevbtalk.com

Is there a way to include bold, italic, or underline in a standard MsgBox? I don't want to hassle to make a whole new form to do this, but still, any way to do this?--Defiance"Soon I will answer your questions, now you will answer mine..."

Crystal Report: How Do I Change The Font At Runtime. www.codeguru.com

Hello, i am using VB 6.0 and Crystal report 8.5, I want to change the font size, style (bold, italic, underline), the detail field alignment AT RUNTIME, but i don't know how.Dim apprep As New CRAXDRT.ApplicationDim rep As New CRAXDRT.Report 'my report objectis there any property for report to do this?ThanksHello, Szilard wish you the best.You can mail me at:darkertemplar@hotmail.combye

Converting Styles To Tags www.vbforums.com

Hi all I want to read a excel cell, where formatting (bold, italic) is done.Suppose if the excel cell contains I am a newbie in visual basicI have to convert into I am a <italic>newbie in visual basic</italic>.that is I have to insert <italic> tag in the beginning and </italic> at the endAny ideas how to proceed the reading of styles in visual basic.Thanks in advance

Check Boxes!!! www.vbforums.com

Damn this is probably really easy to all of you, but im a beginner.Now, I have three check boxes one for italics, one for bold and one for underline and i have a rich text box. How would i change all the text in the rich text box depending on which check box i click?(without having to select it) thanks for help ,hepy

How To Show Format Bar In RichTextBox www.xtremevbtalk.com

I have a Microsoft RichTextBox on my vb6.0 application. Can someone please tell me how to do the following. 1. Allow the user to use RichTextBox like a wordpad. for example, the user should be able to hit carriage return/enter key to start a new line2. User shoulbe able to see and click bold, italics, underline icons etc. Inshort how can i show the user the format bar on top of the RichTextBox

How To Show Format Bar In RichTextBox www.vbcity.com

I have a Microsoft RichTextBox on my vb6.0 application. Can someone please tell me how to do the following. 1. Allow the user to use RichTextBox like a wordpad. for example, the user should be able to hit carriage return/enter key to start a new line2. User shoulbe able to see and click bold, italics, underline icons etc. Inshort how can i show the user the format bar on top of the RichTextBox

Combo Box To Select Font www.xtremevbtalk.com

hi, i'm a newbeecan any 1 help im trying to get a textboxes font to change bold, italic, or underline when selected from a combobox.but aint got a clue what to write for the coding ive tried:Private Sub cmbStyle_Change()If cmbStyle.Text = listitem Then txtRecievemessage.FontItalic = True txtRecievemessage.FontBold = True txtRecievemessage.FontUnderline = TrueEnd IfEnd Subthanks

Android :: Underline Of TextView groups.google.com

How to set underline attribute on a TextView? I just see it can set bold and italic on TextView.

Convert Textbox's Text (containing Different Characters Of Different Font & Color ) Into Image Or Pi... stackoverflow.com

I am doing project in vb.netI am using a Rich text box on which i can set different ont(name,size,bold,italic,underline),color to different selected text.I am able to do this in Rich textbox but i want to create bitmap (or assign to picturebox) of this of different text with different font style & color but i am getting not much font as like textbox in image..

Implement A Simple Text Editor Within A RichTextBox? social.msdn.microsoft.com

What is the easiest way to implement a simple text editor w/in a RichTextBox? For example, one similar to what I'm using here to enter this text (i.e., having a bold, italic, underline, redo/undo, bullet, number, and hyperlink buttons).

Change Text-style In Richtextbox? social.msdn.microsoft.com

"This is a test . This is the second test . This is the third test . This is the final test"I know how to do this using SelectionStart etc. However this limits what I want to domagine that the 4 sentences are stored in an array, where array(0) should be always bold,array(1) italic, array(2) underline and array(3) normal.

Determine The Font Style Of A Label Control bytes.com

Does anyone know how to capture and save the font style of a label control. (FontStyle.Bold, FontStyle.Italic, FontStyle.Underline) I need to be able to save the font style and have it reapplied when I reopon my form. I know how to "reapply" it when I open the form again. I just need help getting the original value for saving purposes.

Regex To Delete HTML Within <table> Tags? stackoverflow.com

I have an HTML document in .txt format containing multiple tables and other texts and I am trying to delete any HTML (anything within "<>") if it's inside a table (between <table> and </table>). For example: =================== other text <other HTML> <table> <b><u><i>bold underlined italic text</b></u></i> [code]....

Forms Data Controls :: Delete Row In Datatable Where Info For Add To Cart Control Displayed forums.asp.net

I tried same method using C# and did not work for me. My case is very similar. Have my GridView Detail as thus sp:GridView ID="ResultGrid" runat="server" CellPadding="3" BackColor="Black" Font-Bold ="False" Font-Italic="False" Font-Overline="False" Font-Underline="False" ForeColor ="#333333" pageSize="5" UseAccessibleHeader="True" AutoGenerateColumns="False" DataKeyField "S/N" Font-Size="Small" Font-Strikeout="False" Caption="Contacts" EmptyDataText ="No Record Added" AutoGenerateDeleteButton="True" OnRowCommand="DeleteRecord_Click" > <AlternatingRowStyle BackColor="White" /> Within which I have my ImageButton Template as thus: asp:TemplateField HeaderText ="Delete"> <ItemTemplate > asp:ImageButton ID="DeleteRecord" OnClientClick ="return DeleteRow();"